ASM贴片机CPP头半年保养.pdf - 第47页

17 6-monthly CPP Mount the PRV 3 min 1 / 1 CAUTION!Refer to safety instructions in user manual before commencing Mainten- ance NOTICE! ESD guidelines are to be followed Tool: T21, T47, T78 Wear Part: Consumables: 1 Proc…

16 6-monthly CPP Replace the filter discs 3 min 2 / 2

CAUTION!Refer to safety instructions in user manual before commencing Mainten-

ance

NOTICE! ESD guidelines are to be followed Tool:

T21, T37, T47

Wear Part:

W7, W16

Consumables:

7 Repeat step 4 to 6 for all segments. 8 Mount all nozzles.

17 6-monthly CPP Mount the PRV 3 min 1 / 1

CAUTION!Refer to safety instructions in user manual before commencing Mainten-

ance

NOTICE! ESD guidelines are to be followed Tool:

T21, T47, T78

Wear Part: Consumables:

1 Proceed with the head stand flat on the

table.

2 Plug in the hoses at the pressure regulator

valve.

3 Plug in the hose at the screwed joint.

4 Mount the PRV to the front part. NOTE the

different length of screw (1) and screw (2).

5 Tighten both screws with a torque of 0,9

Nm.

6 Press the two clips at the side and con-

nect the ribbon cable properly.