ASM贴片机CPP头半年保养.pdf - 第62页
在线预览 ASM贴片机CPP头半年保养.pdf PDF 文档。
21 6-monthly CPx+TH Appendix: Maintain the Pressure Regulator Valve (PRV) 10 min 7 / 7
CAUTION!Refer to safety instructions in user manual before commencing Mainten-
ance
NOTICE! ESD guidelines are to be followed Tool:
T44, T46, T53, T69, T80
Wear Part:
W28, W42, W45, W46
Consumables:
C3, C5, C11, C19, C22
37 Turn the 3 self tapping screws first to the
left checking for the thread before tighten-
ing them with a torque of 0,20 Nm.
38 Insert both plastic jackets and put on the
PCB.
39 Turn the 2 screws slightly to the left check-
ing for the thread before tightening them
with a torque of 0,20 Nm.
40 Put on the cover starting at the top (1) and
close it over the PCB (2). Turn the 2
screws slightly to the left checking for the
thread before tightening them with a
torque of 0,20 Nm.
22 6-monthly Multipette Appendix: Prepare the multipette 5 min 1 / 3
CAUTION!Refer to safety instructions in user manual before commencing Mainten-
ance
NOTICE! ESD guidelines are to be followed Tool:
T22, T23
Wear Part: Consumables:
C3, C10
1 The following description is made by way
of example with blue oil and combitip. For
the oil and combitip to be used, see the in-
dividual task.
2 Prepare multipette V2. For multipette V1
proceed with Step 9.
3 Push down the filling lever and keep it
there.
4 Push the application lever and press the
needed combitip onto the mulitipette until
it engages.
5 Release the lever and turn the wheel to
the volume required for the task.
6 Check the expiration date of lubricant at
the back of the flask and fill-up the multi-
pette.