00194579-0202.pdf - 第50页
Retrofit instructions Wide board 242 / 508 mm SIPLACE HS-60 / D4 08/2006 Edition 52 : Fit the limit switch on the new mou nt and then o n the bearing flange of the conveyor side wall. 2 2 : Move the stationary conveyor s…
Retrofit instructions Wide board 242 / 508 mm SIPLACE HS-60 / D4
08/2006 Edition
51
: Use the "PCB conveyor", "Options and configuration", "Teach" function to move the stationary
conveyor side wall 5 x 10 mm increments to the side so that you can remove the assembly tray
limit switch from its current position.
2
Do not accept the setting. Do not click on OK. 2
2
2
2
2
Limit switch,
old version
Retrofit instructions Wide board 242 / 508 mm SIPLACE HS-60 / D4
08/2006 Edition
52
: Fit the limit switch on the new mount and then on the bearing flange of the conveyor side wall.
2
2
: Move the stationary conveyor side wall 5 x 10 mm increments to the original position.
2
Do not accept the setting. 2
2
2
2
2
2
Assembly tray limit
switch new position
Retrofit instructions Wide board 242 / 508 mm SIPLACE HS-60 / D4
08/2006 Edition
53
: In the "Conveyor“ view, switch to the "Options and configuration“ subview.
: Run the extended conveyor configuration "Position of fixed edge“ with
"Standard width / Excess width HS-60 (wide HS-60) / Excess width HF series (wide HF
series)“.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2