Portal_Manual_1.2.1_Rev_H-1.pdf - 第18页

Portal PVA Revisio n H ( 2018 ) 18 of 93 5 Portal Ov erview The Port al screen ha s sever al components . Understan ding th e sections of the Por tal screen will help y ou to successfully navigate the Port al program. Fi…

100%1 / 93
Portal
PVA
Revision H (2018)
17 of 93
4.1.1 Portal Shell Keyboard Shortcuts
NOTE: You should not need to exit Portal Shell for normal operation, this is a
maintenance feature.
Keys
Action
F1
Keyboard Shortcut Help
Ctrl + Shift + F12
Exit PortalShell Application
Ctrl + Shift + D Launch Windows Desktop
Ctrl + Shift + W Launch Desktop Then Exit PortalShell Application
Portal
PVA
Revision H (2018)
18 of 93
5 Portal Overview
The Portal screen has several components. Understanding the sections of the Portal
screen will help you to successfully navigate the Portal program.
Figure 3: Portal Screen Overview
• Select the necessary mode from the mode selection.
Note: You must be in Cycle Stop to select a new mode.
• When you select a mode, the options for that mode will be shown in the mode
display section of the screen.
• The system tabs section of the screen remains the same no matter what mode
you select. This section of the screen contains the terminal used to
communicate with the controller. The terminal is used as a debug tool.
Portal
PVA
Revision H (2018)
19 of 93
5.1 Cycle Stop Interface
Figure 4: Cycle Stop
After you log in and select “Continue”, Portal opens in cycle stop mode. It is the default
mode for the workcell. All other modes and options can be accessed from this mode
with the buttons shown. You must return to Cycle Stop to access all other modes.
1. Select “Auto” to operate the machine in Auto Cycle. Refer to Section 7.
2. Select “Stop” to go to Cycle Stop mode from any other mode.
3. Select “Manual” to operate the machine manually. Refer to Section 6.
4. Select “Setup” to see or change the setup functions of the machine. Refer to
Section 8.
NOTE: You must select “Stop” to change from one mode to another. For
example to go from Manual mode to Auto Cycle you must select “Stop” and
then select “Auto”. You must be in Cycle Stop to shut down Portal.
5. Select the desired program to use while in auto mode from the Program
Selection dropdown menu. Refer to Section 5.2.
6. Select “Quit” to shutdown the program (Portal).