Portal_Manual_1.2.1_Rev_H-1.pdf - 第25页

Portal PVA Revisio n H ( 2018 ) 25 of 93 6.4 Run M ode Fig ure 12 : Run Mode, Manual Mode In Run mode y ou ca n test a down loade d path program for a sing le cycle . Y o u ca n run the path as “ WET ” or “ DRY ” . Make …

Portal

PVA

Revision H (2018)

24 of 93

6.3 Board Locators

Figure 11: Board Locators, Manual Mode

Board Locators are controlled under the “Locate” tab. This is an optional feature for

workcells with pneumatic-powered board locators. Only workcells with board locators

will have this option. If this feature is present, the operator can move the board locators

to the up and down positions.

1. Select the “Locate” tab.

2. Select Locate “UP” to move the locators to the up position.

3. Select Locate “DOWN” to move the locators to the down position.

Portal

PVA

Revision H (2018)

25 of 93

6.4 Run Mode

Figure 12: Run Mode, Manual Mode

In Run mode you can test a downloaded path program for a single cycle. You can run the

path as “WET” or “DRY”. Make sure that the part is in the correct position inside the

workcell before the path is run or the results will not be accurate and could damage the

workcell.

1. Select the “Run” tab.

2. Select “A” or “B” (if necessary) to select which side will run. Select “A” for the

left side program select drop down or B for right side program select drop

down.

3. Select “WET” to run the selected program with the valves on.

4. Select “DRY” to run the selected program with the valves off (valves will move

but will not dispense).

NOTE: Make sure the correct program is selected from the Program Selection

drop down menu. Make sure the part is correctly installed and all board stops

and locators are in the correct position to prevent a crash.

Portal

PVA

Revision H (2018)

26 of 93

6.5 PathMaster®

Figure 13: Launch PathMaster from Manual Mode

This tab contains a button that launches the included PathMaster® software.

1. Select the PathMaster tab.

2. Select “Run PathMaster” to open the PathMaster®. The PathMaster window

will open below the Portal screen.

Figure 14: PathMaster Open in Manual Mode of Portal