CP43维护手册.pdf.pdf - 第151页
17 – 3 V ersion 8.1 Chapter 17 Lubrication Apply a small amount of Biral T& D to the joints of the feeder sproket rotation portion, the linking axis mechanism and the portions that move. If too much lubrication is ap…
Chapter 17 Lubrication
17.2Lubricant Table
The table below shows which lubricant to use on the listed machine parts.
Table 17-1 Lubricant Table
✓ = lubricant is suitable
Part
Daphne
Eponex
No. 2
Biral
T&D
Omega 66 Frequency
Every month
Every week
Every month
Every month
Everyweek
Every month
Every week
Every month
Every month
Every month
Every 3 months
As required
Every month
Every month
Every month
Every 50 hours
Every 50 hours
Every 50 hours
Every week
XY tableDevice tableCam boxTurretFeedersConveyors
Ball screw
Ball screw
Toggle clamp
Cam
Lever pivots
Rod link pins
Lever stopper slider
Indexing cam
followers
Grooved cam
Station 3 & 6 gears
Each link coupling
Movable parts
Rachet
Screw
LM guide
LM guide
LM rail
LM block
New
Old
LM rail
LM block
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
AFB
Grease
AFC
Grease
✓
✓
17 – 2
Version 8.1
CP IV-3 Maintenance
17 – 3
Version 8.1
Chapter 17 Lubrication
Apply a small amount of Biral T& D to the joints of the feeder sproket
rotation portion, the linking axis mechanism and the portions that move.
If too much lubrication is applied to station 6's gears, it may spurt onto
other parts when rotating. If any grease gets on the fine-theta clutch at
station 6, it may cause some slippage affecting the accuracy of part
placement. Take care not to apply too much grease to station 6's gears.
Indexing Cam Follower Lubrication
Use AFC grease on the new cam followers, or AFB grease on the
old cam followers as specified in the lubricant table. A special
syringe is necessary to apply the grease. Insert the grease tube in
the syringe and apply the grease to the holes in the cam follower as
is shown in the figure below.
Fig. 17-1 Cam follower grease application
Fig. 17-2 Cam follower lubrication
Grease tube Oil application syringe
CP IV-3 Maintenance
Chapter 17 Lubrication
17 – 4
Version 8.1
CP IV-3 Maintenance