SM482PLUS_Maintenance(Eng_Ver2.7).pdf - 第25页
MEMO Multi -Func tional Placer SM482PLUS Maintenance Handbo ok 1-1 6 Conditions for Main tenance
Chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Multi-Functional Placer
SM482PLUS Maintenance Handbook
1-15
Tools for Maintenance
5. Grease List
Part No. Part Name Use Specifications Ref.
J9099107A GREASE GUN Conveyor LM Guide SUNGKWANG / KH-20 Old Type
HP09-000258 GREASE-GUN_MG70_THK
X Frame LM Guide, Ball Screw
Y Frame LM Guide, Ball Screw
THK / MG70
New Type
70g Exclusive use
CM02-900022 GREASE GADUS S2 V220-2
Head Mirror CAM, LM Guide Rail
Conveyor LM Guide, Lead Screw
GADUS S2 V220-2 Volume: 15kg
CM02-000083 GREASE-GREASE_AFE-CA+70_THK;SYNTHETIC,OL
X Frame LM Guide, Ball Screw
Y Frame LM Guide, Ball Screw
AFE-CA+70 Volume: 70g
CM02-900008 GREASE_AFF+70_THK Head Ball Spline AFF+70 Volume: 70g
CM02-000093 GREASE-KS-63W X-Y Axis Flat Cable Shinetsu/ KS-63W Volume: 1kg
MEMO
Multi-Functional Placer
SM482PLUS Maintenance Handbook
1-16
Conditions for Maintenance
Chapter 2
Inspection Items for Maintenance
Multi-Functional Placer
SM482PLUS Maintenance Handbook
2-1
Daily Inspections
Check-up List
Maintenance
Cycle
Reference
Time
required
Period No Inspection Item Measures Tools
Daily
D-1 Nozzle Inspect and clean
Recommended Cleaning solution:
Ethyl alcohol, Air gun, Lubricating oil
for nozzle: Tri-Flow, Spray straw, Bore
through-pin, Ultrasonic cleaner
2 years
After use of the
machine
10 Minutes
D-2 Dump Box Clean
After use of the
machine
5 Minutes
D-3 Feeder, Feeder Base Clean Brush
After use of the
machine
10 Minutes
D-4 Backup Table Clean Ultra fine fiber cloth, Cleaning liquid
After use of the
machine
5 Minutes
D-5 Air Filter Inspect and replace 1 year Frequent inspection 30 Minutes
D-6 Mist Separator Filter Inspect and replace 1 year Frequent inspection 30 Minutes
Setting the replacement period for parts
ㆍ The part inspection and replacement interval shall be set up based on the specified operation environment.
ㆍ If the conditions for operation are poor, the part inspection and replacement interval may be reduced.
ㆍ In the above table, C/S means our designated C/S company or our overseas local agents.
ㆍ Consumables should be purchased for a fee, regardless of the warranty period.
Chapter 2
Inspection Items for Maintenance
Daily Inspections