SM482PLUS_Maintenance(Eng_Ver2.7).pdf - 第4页
※ W arnings and cautions fo r safe ty ■ Cautions to be exercised for the safety and to be referr ed to for the work are described as follows in this manual. Dange r If the instructions following this symbol are not follo…
Notice
■ Copyright
© Hanwha Precision Machinery Co., Ltd.
■ Restrictions
Hanwha Precision Machinery Co., Ltd. owns the copyright to this manual. It
is prohibited to duplicate,distribute and reproduce or change this manual and
the information therein, in whole or in part,without official permission from
Hanwha Precision Machinery Co., Ltd.
■ Limitation Of Liabilities
Hanwha Precision Machinery Co., Ltd. exerted its best efforts to include the
correct information in this manual but will not guarantee the correctness of
the information. Users shall take full responsibility for the results of using this
document. Hanwha Precision Machinery Co., Ltd. may change the contents of
this document without notice.
■ Contact Information
You can use the ‘Support’ menu on our internet website or use email to
inquire about this manual and request manual data. Additionally, you can use
the ‘Company’ and ‘Support’ menus to check domestic and overseas business
location information for the product you purchased.
ㆍ Our Company Website Address: https://www.hanwha-pm.com/en/
ㆍ Our Company E-mail: smtcs@hanwha.com
※ Warnings and cautions for safety
■ Cautions to be exercised for the safety and to be referred to for the work are
described as follows in this manual.
Danger
If the instructions following this symbol are not followed, serious accidents
could occur, or death or serious injury of the operator could happen. Be
sure to follow the instructions.
Warning
If the instructions following this symbol are not followed, serious accidents
could occur, or serious injury of the operator could happen. Be sure to
follow the instructions.
Caution
If the instructions following this symbol are not followed, damage of
machine hardware, software, and data could occur or the operator could
be injured. Be sure to follow the instructions.
The item according to this mark describes the item to which the user needs
to refer when performing the corresponding work.
※ Cautions to be exercised before using the machine
Warning
Cut off the pneumatic system and power supply before performing
maintenance and repair of the machine. Otherwise, personal injury or
death may occur. Hanwha Precision Machinery Co., Ltd. is not responsible
for problems caused by machine repairs performed in a manner not
mentioned in this manual, or any modifications carried out without prior
approval.
Caution
If you need an additional repair other than the maintenance work
mentioned in this manual, contact our C/S company or local agent for
proper measures.
※ Symbols for Work Instructions
■ This manual expresses safety related items to be kept in mind as well as
reference items for work as indicated by the following symbols:
Inspect
The remarks following this symbol refer to performing visual inspection of
foreign material, chip etc.
Clean
The remarks following this symbol refer to cleaning with cloth or brush.
Grease
The remarks following this symbol refer to injecting grease using a grease
gun.
Replace
The remarks following this symbol refer to replacing a part.
Apply
Grease
This symbol refers to applying grease using a brush.
※ Warnings and cautions for safety
For the safe use of this machine, the label for safety related cautions is attached at
the following position.
Front view of the machine
For more details about the label for cautions about safety, refer to the
Administrator's Guide.
Rear View of the Machine