SM482PLUS_Maintenance(Eng_Ver2.7).pdf - 第59页
Mon thly Inspe ction Chap ter 5 Multi -Func tional Placer SM482PLUS Maintenance Handbo ok 5-6 Cleaning and apply grease the Head Ball Spline, LM Guide, Mirror CAM Monthly Inspe ction T ool for M aintenanc e Ultra-fine fi…
Monthly Inspection
Chapter 5
Multi-Functional Placer
SM482PLUS Maintenance Handbook
5-5
Checking and Cleaning the Cover Cooling Fan Filter
Checking and Cleaning the Cover Cooling Fan Filter
Tool for Maintenance
Vacuum cleaner
Measures
Cooling Fan Filter
Cooling Fan Filter Cover
Step 1.
Remove the filter in the order as shown in the following
figure and clean it. (If the filter is damaged, replace it.)
ㆍ Separate the cooling fan cover
ㆍ Separate the Cooling fan filter
ㆍ Clean the filter using a vacuum
cleaner
Caution
Washing the cooling fan filter with water may cause damage to the
filter by making it harden.
Step 2.
Release the emergency stop as described in “Releasing
‘Emergency Stop’ mode” on page 1-6 and perform the
operation again.
(Time required: 15min / No. M-4)
Monthly Inspection
Chapter 5
Multi-Functional Placer
SM482PLUS Maintenance Handbook
5-6
Cleaning and apply grease the Head Ball Spline, LM Guide, Mirror CAM
Monthly Inspection
Tool for Maintenance
Ultra-fine fiber cloth, Flat Brush, Syringe, GREASE: GADUS S2 V220-2, AFF-70
Measures
Step 1.
Move the X Frame to front by referring to “Forward
movement of the X-frame” on page 1-3.
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to “How to perform emergency stop” on page
1-2.
Step 3.
Remove the tube from the Vacuum Filter
Step 4.
Apply grease to the LM guide rail using a syringe and
apply grease to the ball spline and the Mirror CAM.
(Ball Spline : AFF-70, LM Guide Rail, Mirror CAM : GADUS S2
V220-2)
S Axis Mirror CAM
Z Axis LM Guide
Ball Spline
Step 5.
Release the emergency stop as described in “Releasing
‘Emergency Stop’ mode” on page 1-6 and perform the
operation again.
Cleaning and apply grease the Head Ball Spline, LM
Guide, Mirror CAM
(Time required: 30min / No. M-5)
Monthly Inspection
Chapter 5
Multi-Functional Placer
SM482PLUS Maintenance Handbook
5-7
Cleaning and Lubricating the X Frame LM Guide, Ball Screw
Tool for Maintenance
Ultra-fine fiber cloth, Lubricator: MG70, GREASE: AFE-CA
Measures
Step 1.
Move the X Frame to front by referring to “Forward
movement of the X-frame” on page 1-3.
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to “How to perform emergency stop” on page
1-2.
Step 3.
Clean the LM guide rail and ball screw using an ultra fine
fiber cloth
Cleaning and Lubricating the X Frame LM Guide, Ball
Screw
Step 4.
Inject the grease using a lubricator.
(Time required: 60min / No. M-6)