00193893-04.pdf - 第67页
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit in structions - SIPLACE HF seri es head reconfiguration kits 05/2006 Edition 67 2
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
66
2.4.5 Installing the cameras
Carry out this item only if there is no vision control unit installed in the affected distributor. 2
Installing the vision control unit 2
: Check whether all the required cables are present (see photograph on the left).
– Component camera cables (1 + 2)
– CAN bus cable (3)
– Power supply (4)
– HF cable: Vision Flash (included with the retrofit kit)
: Fit the vision control unit (see photograph on the right).
: Plug in the cables (see the photograph on the right and the diagram below).
– Component camera cable on X4 and X5 (1 + 2) (note the cable labeling)
– CAN bus cable on X2 (3)
– Power supply on X9 (4)
– Plug in the Vision Flash cable X3 (5) and X6 (6) for the vision DC/DC converter (main dis-
tributor) or the vision DC distributor (sub-distributor)
: When downloading the TwinHead firmware, also install the vision firmware.
2
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
67
2
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
68
Inserting the cameras 2
: Fix the partition plate for fiducials (item no.: 03022077-xx) using two setscrews DIN 913 - M 6
x 50-ST (item no.: 03005958-)
2
The fiducial plate is very heavy. 2
2
: Fix the base plate for the IC camera onto the partition plate using two screws DIN912-M6 x
35-8.8 (item no.: 00845062-) an.
: Replace the setscrews DIN 913 - M 6 x 50-ST with the screws DIN912-M6 x 35-8.8 (item no.:
00845062-xx).
2
: Fix the base plate for the IC camera onto the partition plate using four screws (screws for fixing
the camera: DIN912-M6 x 35-8.8, item no.: 00845062-xx).
Use the top screw holes.
2
2
2
2
2
2
4 screws