00193893-04.pdf - 第72页
2 Retrofit instructions - SIPLACE HF series head re confi guration kits SIPLACE HF Series Head Reconfiguration Kits 05/2006 Edition 72 2.4.6 Replacing the placement head 2 Wear an ESD ar mband for the whole time you are …
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
71
: Remove the sensor for the C&P head reject bin and wire it to the new reject bin for the P&P or
TwinHead.
: Attach the sensor to the mount for the new reject bin.
2
: Insert the new reject bin.
2
: Insert the new nozzle changer (P&P / TwinHead) and fix in place with four screws.
2
Remove the sensor
Refit the sensor
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
72
2.4.6 Replacing the placement head
2
Wear an ESD armband for the whole time you are working on the placement head and servos. 2
2
2
The conversion is easiest to carry out from locations 2 and 4. 2
2
2
: Detach these two hoses:
2
2
: Remove the top and bottom hoses.
2
2
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
73
: Remove the plug on the exhaust air damper.
2
2
: Detach the camera cable and the four other cables in the photograph below.
2
2
: Release the pushbutton and remove the strain relief over the cables.
2