00193893-04.pdf - 第90页
2 Retrofit instructions - SIPLACE HF series head re confi guration kits SIPLACE HF Series Head Reconfiguration Kits 05/2006 Edition 90 : Remove the fiducial plate, if present. 2 The fiducial plate is very heavy . 2 2 : D…
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
89
: Remove the body of the IC camera.
: Attach the Risk of head crash warning label to the body of the IC camera (if it is not already
attached).
2
2
: Remove the supporting frame for the IC camera from the base plate by folding it up, and then
pulling it up and out.
2
2
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
90
: Remove the fiducial plate, if present.
2
The fiducial plate is very heavy. 2
2
: Detach the IC camera cable from the connections on the base plate.
: Push the cables into the machine frame to protect them against damage.
: Loosen the four screws (M6) on the IC camera base plate and remove.
2
: The FC camera can be dismantled in the same way, if necessary.
: Carefully fit the nozzle changer extension.
Be careful, the extension is very fragile.
2
4 screws
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
91
: Fit the nozzle changer extension on the inside of the placement machine.
2
2
: Remove the sensor for the TwinHead reject bin and wire it to the new reject bin for the C&P
head.
: Attach the sensor to the mount for the new reject bin.
2
2
: Insert the reject bin(s) for the C&P head.
2
2
2
Refit the sensor
Remove the sensor