Specification SIPLACE X-Series规格说明书2.pdf - 第14页
14 Placement Heads Collect & Place Heads SIPLACE S peedS tar CO camera type 23 C&P20) SIPLACE MultiStar CO camera type 30 (CPP) SIPLACE MultiStar CO camera type 33 (CPP) Component range a a) Please note that the …
13
Placement Heads
Standard Functions / Options
SIPLACE SpeedStar (C&P20) SIPLACE MultiStar (CPP)
Standard
functions
High-resolution head camera,
vacuum sensor, force measure-
ment, component sensor, inte-
grated turning station for each
segment, PCB warpage check,
individual recording for each
component
Standard
functions
High-resolution head camera,
vacuum sensor, force measure-
ment, component sensor, inte-
grated turning station for each
segment, PCB warpage check,
individual recording for each
component
Options Nozzle changer, special nozzles Options Nozzle changer, special noz-
zles, high-resolution head cam-
era for 01005 components,
stationary fine-pitch camera
SIPLACE TwinStar (TH)
Standard
functions
Stationary fine-pitch camera,
vacuum sensor, force measure-
ment, nozzle changer, PCB war-
page check, individual recording
for each component
Options Stationary flip-chip camera, spe-
cial nozzles, grippers
14
Placement Heads
Collect&Place Heads
SIPLACE SpeedStar
CO camera type 23
C&P20)
SIPLACE MultiStar
CO camera type 30
(CPP)
SIPLACE MultiStar
CO camera type 33
(CPP)
Component range
a
a) Please note that the range of components that can be placed is also affected by the pad geometry,
customer-specific standards, component packaging tolerances and component tolerances.
01005 to 2220, Melf,
SOT, SOD
01005 to
27 x 27 mm²
0402 to
50 x 40 mm²
Component spec.
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
4 mm
0.25 mm
0.1 mm
0.4 mm
0.2 mm
0.4 x 0.2 mm²
6 x 6 mm²
1 g
8.5 mm / 6 mm
b
0.3 mm
0.15 mm
0.25 mm
c
0.35 mm
d
0.14 mm
c
0.2 mm
d
0.4 x 0.2 mm²
27 x 27 mm²
4 g
b) CPP head in low assembly position: stationary component camera cannot be used here.
c) For components < 18x18 mm².
d) For components 18x18 mm².
11.5 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 x 0.5 mm²
50 x 40 mm²
8 g
Programmable set-
down force
1.5 N - 4.5 N 1.0 N - 10 N 1.0 N - 10 N
Nozzle types 10xx, 11xx, 12xx 20xx, 28xx 20xx, 28xx
X/Y accuracy
e
e) The accuracy value was measured using the vendor-neutral IPC standard.
± 41 µm/3
± 55 µm/4
± 41 µm/3
± 55 µm/4
± 34 µm/3
± 45 µm/4
Angular accuracy ± 0.5°/3
± 0.7°/4
± 0.4°/3
f
, ± 0.5°/3
g
± 0.5°/4
f
, ± 0.7°/4
g
f) For components between 6 x 6 mm² and 27 x 27 mm².
g) For components smaller than 6 x 6 mm².
± 0.2°/3
± 0.3°/4
Illumination levels 5 5 6
Possible illumination
level settings
256
5
256
5
256
6
15
Placement Heads
SIPLACE MultiStar (CPP)
Increased Performance & Flexibility
The SIPLACE MultiStar is
the perfect SIPLACE solu-
tion:
• In an increasingly complex
production environment
• For an increasing diversity
of setup and production
strategies
• For a wide spectrum of
components
• For frequent product
changeovers.
It is even possible to place
larger components without a
noticeable drop in perfor-
mance. The SIPLACE Multi-
Star is perfectly designed for
integration into a flexible and
speed-optimized production
environment.
One head for all applica-
tions
• The SIPLACE MultiStar
offers top flexibility
• It combines
Collect&Place mode with
Pick&Place mode
One head supports three
placement modes:
Elimination of bottlenecks
• A wider component spec-
trum
• Optimum performance uti-
lization
• More feeder tracks for the
TwinStar
• Improved throughput due
to perfect line utilization
• More products in one set-
up family
Throughput
• Up to 23,000
components/h bench-
mark value
• Up to 19,000
components/h IPC 9850
performance
Collect&Place mode Mixed mode
Pick&Place mode