Specification SIPLACE X-Series规格说明书2.pdf - 第15页
15 Placement Heads SIPLACE MultiStar (CPP) Increased Performance & Flexibility The SIPLACE MultiStar is the perfect SIPLACE solu- tion: • In an increasingly complex production environme nt • For an in creasing d iver…
14
Placement Heads
Collect&Place Heads
SIPLACE SpeedStar
CO camera type 23
C&P20)
SIPLACE MultiStar
CO camera type 30
(CPP)
SIPLACE MultiStar
CO camera type 33
(CPP)
Component range
a
a) Please note that the range of components that can be placed is also affected by the pad geometry,
customer-specific standards, component packaging tolerances and component tolerances.
01005 to 2220, Melf,
SOT, SOD
01005 to
27 x 27 mm²
0402 to
50 x 40 mm²
Component spec.
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
4 mm
0.25 mm
0.1 mm
0.4 mm
0.2 mm
0.4 x 0.2 mm²
6 x 6 mm²
1 g
8.5 mm / 6 mm
b
0.3 mm
0.15 mm
0.25 mm
c
0.35 mm
d
0.14 mm
c
0.2 mm
d
0.4 x 0.2 mm²
27 x 27 mm²
4 g
b) CPP head in low assembly position: stationary component camera cannot be used here.
c) For components < 18x18 mm².
d) For components 18x18 mm².
11.5 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 x 0.5 mm²
50 x 40 mm²
8 g
Programmable set-
down force
1.5 N - 4.5 N 1.0 N - 10 N 1.0 N - 10 N
Nozzle types 10xx, 11xx, 12xx 20xx, 28xx 20xx, 28xx
X/Y accuracy
e
e) The accuracy value was measured using the vendor-neutral IPC standard.
± 41 µm/3
± 55 µm/4
± 41 µm/3
± 55 µm/4
± 34 µm/3
± 45 µm/4
Angular accuracy ± 0.5°/3
± 0.7°/4
± 0.4°/3
f
, ± 0.5°/3
g
± 0.5°/4
f
, ± 0.7°/4
g
f) For components between 6 x 6 mm² and 27 x 27 mm².
g) For components smaller than 6 x 6 mm².
± 0.2°/3
± 0.3°/4
Illumination levels 5 5 6
Possible illumination
level settings
256
5
256
5
256
6
15
Placement Heads
SIPLACE MultiStar (CPP)
Increased Performance & Flexibility
The SIPLACE MultiStar is
the perfect SIPLACE solu-
tion:
• In an increasingly complex
production environment
• For an increasing diversity
of setup and production
strategies
• For a wide spectrum of
components
• For frequent product
changeovers.
It is even possible to place
larger components without a
noticeable drop in perfor-
mance. The SIPLACE Multi-
Star is perfectly designed for
integration into a flexible and
speed-optimized production
environment.
One head for all applica-
tions
• The SIPLACE MultiStar
offers top flexibility
• It combines
Collect&Place mode with
Pick&Place mode
One head supports three
placement modes:
Elimination of bottlenecks
• A wider component spec-
trum
• Optimum performance uti-
lization
• More feeder tracks for the
TwinStar
• Improved throughput due
to perfect line utilization
• More products in one set-
up family
Throughput
• Up to 23,000
components/h bench-
mark value
• Up to 19,000
components/h IPC 9850
performance
Collect&Place mode Mixed mode
Pick&Place mode
16
Placement Heads
SIPLACE TwinStar
SIPLACE TwinStar
Fine-pitch camera
a
(component camera type 33)
a) Two stationary cameras may be configured for each gantry.
SIPLACE TwinStar
Flip-chip camera (option)
a
(component camera type 25)
Component range
b
b) Please note that the range of components that can be placed is also affected by the pad geometry, customer-
specific standards, component packaging tolerances and component tolerances.
0402 to SO, PLCC, QFP, BGA, spe-
cial components, bare dies, flip-
chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components,
bare dies, flip-chips, shields
Component specs
c
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
d
c) If MultiStar and TwinStar are combined in one placement area, the maximum component height is restricted.
d) If standard nozzles are used.
25 mm (larger heights on request)
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 x 0.5 mm²
55 x 45 mm² (single measurement)
For use with two nozzles
50 x 50 mm² or
69 x 10 mm²
For use with one nozzle:
85 x 85 mm² or
125 x 10 mm²
max. 200 x 125 mm² (with restric-
tions)
100 g
25 mm (larger heights on request)
0.25 mm
0.1 mm
0.14 mm
0.08 mm
0.6 x 0.3 mm²
16 x 16 mm² (single measurement)
55 x 55 mm² (multiple measurement)
100 g
Programmable set-down
force
1.0 N - 15 N
2.0 N - 30 N
e
e) SIPLACE high-force head.
1.0 N - 15 N
2.0 N - 30 N
e
Nozzle types
f
f) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available
online.
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
gripper
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
gripper
Nozzle spacing for P&P
heads
70.8 mm 70.8 mm
X/Y accuracy
g
g) The accuracy value was measured using the vendor-neutral IPC standard.
± 26 µm/3± 35 µm/4 ± 22 µm/3± 30 µm/4
Angular accuracy ± 0.05° / 3± 0.07°/ 4 ± 0.05° / 3± 0.07° / 4
Illumination levels 6 6
Possible illumination
level settings
256
6
256
6