Specification SIPLACE X-Series规格说明书2.pdf - 第65页

65 List of Options Available options X4 I X4 X3 X 2 Notes Pass-through transport X X X X Flexible dua l conveyor fixed side right XXXX Flexible dua l conveyor fixed side left XXXX PCB alignment, single conveyor X X X X P…

100%1 / 80
64
Standard List
The following functions are contained as standard in the SIPLACE X-series without any extra
charge:
Standard features X4I X4 X3 X2
Vacuum sensor X X X X
Force measurement X X X X
Force sensor n.a.
a
a) Not applicable.
XXX
Fiducial & ink spot detection X X X X
Nozzle changer for the TwinStar n.a. X X X
Set of TwinStar nozzles n.a. X X X
Set of standard nozzles per head X X X X
Service box X X X X
Single conveyor, stationary side right X X X X
Single conveyor, stationary side left X X X X
Wide board configuration X X X X
PCB buffer function on conveyor X X X X
PCB stopper laser light barrier X X X X
Automatic electrical PCB width adjustment X X X X
Operation on both sides X X X X
LCD monitors X X X X
Touch-screen monitor X X X X
indicator lamps X X X X
Tape cutter with reject bin X X X X
Tape separating plates X X X X
01005 placement X X X X
Magnetic pin support X X X X
65
List of Options
Available options X4I X4 X3 X2 Notes
Pass-through transport X X X X
Flexible dual conveyor
fixed side right
XXXX
Flexible dual conveyor
fixed side left
XXXX
PCB alignment, single conveyor X X X X
PCB alignment, dual conveyor X X X X
2D + 1D PCB barcode scanner X X X X
Traceability package X X X X
Read PCB barcode with PCB camera X X X X
SpeedStar X X X X In the two-gantry area, only in com-
bination with another SpeedStar
Reconfiguration kit for the SpeedStar X X X X
MultiStar X X X X
Reconfiguration kit for the MultiStar X X X X
Stationary component camera, type
33, 55 x 45, digital
X X X X For the MultiStar
TwinStar n.a.
a
XXX
High-force head n.a.
a
XXX
Reconfiguration kit for the TwinStar
or high-force head
n.a.
a
XXX
Stationary component camera, type
25, 16 x 16, digital
n.a.
a
X X X For the TwinStar or high-force head
only
3D coplanarity sensor n.a.
a
X X X For the TwinHead or high-force head
only
X2, X3: location 3
X4: location 2 or 3
Vision Teaching Station X X X X
Nozzle changer X X X X Depending on the placement head
Nozzle changer, row 2 n.a.
a
X X X Depending on the placement head
Sensor for the component reject bin X X X X
SIPLACE X component changeover
table
XXXX
Splice detection for X feeder modules X X X X
Linear dipping unit (LDU X) X X X X Can be combined with the Speed-
Star from FS 02
66
List of Options
Available options X4I X4 X3 X2 Notes
Waffle-pack tray holder
SIPLACE X
n.a.
a
a) Not applicable.
X X X Can be used at locations 2 and 4 but
not in combination with the Speed-
Star
Support for an additional tape reel,
SIPLACE X
XXXX
Feeder module adapter for the
X-series
n.a.
a
X X X S linear vibratory feeders and label
presenter modules can be set up on
component changeover tables for
the SIPLACE X using this adapter.
110/208 V conversion kit X X X X
X-series vacuum pump X X X X Not for the TwinStar or high-force
head and MultiStar
MTC n.a.
a
X X X At locations 2 and 4.
Not in combination with the Speed-
Star.
For the MultiStar in the placement
area with 2 gantries: MultiStar only
on the side opposite the MTC and
TwinStar on the same side as the
MTC.
Quad lane conveyor X X n.a.
a
n.a.
a