TR7600 SIII_Series_Maintenance_en_v_2_0_3.pdf - 第56页
Test Research, Inc. 46 TR7600 SI II Series User Guide – Maintenance 9 A NNU A L M A I NTEN A NCE Annual maintenance includes r egular mac hine maintenance activities (as discussed above) and calibrations on X-ray sourc e…
Test Research, Inc.
TR7600 SIII Series User Guide – Maintenance 45
Figure 77: Conveyor Belt – Smooth and Rough Sides
After replaced the conveyor belt, the elasticity of conveyor belt needs to be measured as per
Section 7.1.
Smooth Side
Rough Side
Test Research, Inc.
46 TR7600 SIII Series User Guide – Maintenance
9 A
NNUAL
M
AINTENANCE
Annual maintenance includes regular machine maintenance activities (as discussed above)
and calibrations on X-ray source, camera detectors, 2D camera and laser sensors. These
calibrations have to be conducted by a TRI-certified engineer using TRI-issued standard
calibration procedure. Please check the “Calibration Manual” for more information.
Besides calibration, activities listed below also need to be carried out during annual
maintenance. Please contact TRI engineer for more detailed information on each activity.
1) Radiation Safety Check with Standard value < 0.5 uSv/H
2) X-ray Tube Life Expectancy Verification
3) Camera Profile Type Confirmation (either Xscan, Hamamatsu or Xmaru)
4) Hardware and Software Version Confirmation.
Test Research, Inc.
TR7600 SIII Series User Guide – Maintenance 47
10
M
AINTENANCE
R
ECORDS
Please refer to TRI AXI TR7600 Series maintenance checklist. You may use this checklist as
guideline to suit your production requirements.
10.1 Daily, Weekly and Monthly Maintenance Record
Figure 78: AXI TR7600 Series Maintenance Record for Daily,
Weekly & Monthly Maintenance