00194086-01.pdf - 第13页

User Manual SIPLAC E CS 1 Introduction Software Version SR.408.xx 03/2006 US Edition 1.4 Liability of t he manufacturer/supplier 13 1.4 Liability of the manufacturer/supplier We draw your att ention to the fact t hat thi…

1 Introduction User Manual SIPLACE CS

1.3 Danger notes Software Version SR.408.xx 03/2006 US Edition

1.2.3 User classification

The operating software is structured so that certain functions or menus can only by used or called

by appropriately trained personnel. There are three different classes of user: 1

– operator,

– line engineer and

– service engineer.

Access to each class may be password-protected. Chapters containing information for user

classes higher than "operator" contain a reference to the user class concerned in the footer. 1

Operators 1

The operator class consists of any person who has been trained in operation of the machine.

These people are authorized to use any functions associated with operating the machine and may

call up any menus needed to use the machine. 1

Line engineers 1

Line engineers have undergone special training and are authorized to carry out line engineer ac-

tivities, such as creating set-up configurations, determining vision parameters, etc. 1

Service engineers 1

This class is intended for engineers from SIEMENS. They are trained to carry out servicing work

and to upgrade and retrofit the placement system. 1

1.3 Danger notes

WARNING 1

– A thorough knowledge of the relevant part of this User Manual is required before carrying out

any work on the machine.

– All work must be carried out by appropriately trained and qualified personnel.

– All warning, caution and danger notes MUST be observed.

– In addition, read through chapter 2 of the user manual carefully.

User Manual SIPLACE CS 1 Introduction

Software Version SR.408.xx 03/2006 US Edition 1.4 Liability of the manufacturer/supplier

1.4 Liability of the manufacturer/supplier

We draw your attention to the fact that this user manual only contains descriptive and explanatory

material and does not include any contractual conditions or undertakings. All obligations of Sie-

mens AG proceed from the conclusion of the contract concerned, under which you have the ma-

chine described herein. This applies in particular to all statements regarding performance or

service life and the agreed liability for faults or defects. The provisions of the contract regarding

the liability for faults or defect are neither extended nor restricted by any statements in this user

manual. 1

1.5 EU Declaration of Conformity

The product/device described below 1

Product: Placement machine

Type: SIPLACE CS

Item no.: 140500 1

manufactured by 1

SIEMENS AG, Automation and Drives

Electronics Assembly Systems

Rupert-Mayer-Str. 44

D-81359 Munich 1

conforms to the relevant provisions of: 1

– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on the

approximation of the laws of the Member States relating to machinery

– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the Mem-

ber States relating to electromagnetic compatibility

The product(s) identified above comply with the requirements of the above EU directive by meet-

ing the following standards: 1

EN 294, EN 349, EN 418, EN 811, EN 1050, EN ISO 12100-1, EN ISO 12100-2,

EN 60204-1, EN 60825-1, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8, BGV A1

, BGV A2

1) National specifications

This declaration certifies the compliance with the indicated directives but implies no warranty of properties.

The safety instructions of the accompanying product documentation shall be observed.

1 Introduction User Manual SIPLACE CS

1.6 Revision index Software Version SR.408.xx 03/2006 US Edition

1.6 Revision index

1.7 Revisions since 03/2006 edition

Manual Software version Edition

First edition User manual SR.101.xx 06/2003 US

Revision User manual SR.408.xx 03/2006 US

New or modified Chapter/section

General

1.1

EU Declaration of Conformity 1.5

Safety instructions 2.1

Laser classification 2.3

Safety equipment 2.5

Residual voltages and discharge times in the machine 2.6

Dimensions and weight of the placement system 3.4

Personnel profile 5.1

Setting up the feeder modules 5.4

Operating status indicator lamp 5.9

Feeder modules 6.1

Surf tape feeder module 6.2.10

Dip module 6.2.11