00194086-01.pdf - 第14页
1 Introduction User Manual S IPLACE CS 1.6 Revision index Software Version S R.408.xx 03/2006 US Edition 14 1.6 Revision index 1 1.7 Rev isio ns s inc e 03/20 06 edition 1 1 Manual Software version Edition First editio n…
User Manual SIPLACE CS 1 Introduction
Software Version SR.408.xx 03/2006 US Edition 1.4 Liability of the manufacturer/supplier
13
1.4 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explanatory
material and does not include any contractual conditions or undertakings. All obligations of Sie-
mens AG proceed from the conclusion of the contract concerned, under which you have the ma-
chine described herein. This applies in particular to all statements regarding performance or
service life and the agreed liability for faults or defects. The provisions of the contract regarding
the liability for faults or defect are neither extended nor restricted by any statements in this user
manual. 1
1.5 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE CS
Item no.: 140500 1
manufactured by 1
SIEMENS AG, Automation and Drives
Electronics Assembly Systems
Rupert-Mayer-Str. 44
D-81359 Munich 1
conforms to the relevant provisions of: 1
– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on the
approximation of the laws of the Member States relating to machinery
– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the Mem-
ber States relating to electromagnetic compatibility
The product(s) identified above comply with the requirements of the above EU directive by meet-
ing the following standards: 1
EN 294, EN 349, EN 418, EN 811, EN 1050, EN ISO 12100-1, EN ISO 12100-2,
EN 60204-1, EN 60825-1, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8, BGV A1
1)
, BGV A2
1)
1
1) National specifications
This declaration certifies the compliance with the indicated directives but implies no warranty of properties.
The safety instructions of the accompanying product documentation shall be observed.
1 Introduction User Manual SIPLACE CS
1.6 Revision index Software Version SR.408.xx 03/2006 US Edition
14
1.6 Revision index
1
1.7 Revisions since 03/2006 edition
1
1
Manual Software version Edition
First edition User manual SR.101.xx 06/2003 US
Revision User manual SR.408.xx 03/2006 US
New or modified Chapter/section
General
1.1
EU Declaration of Conformity 1.5
Safety instructions 2.1
Laser classification 2.3
Safety equipment 2.5
Residual voltages and discharge times in the machine 2.6
Dimensions and weight of the placement system 3.4
Personnel profile 5.1
Setting up the feeder modules 5.4
Operating status indicator lamp 5.9
Feeder modules 6.1
Surf tape feeder module 6.2.10
Dip module 6.2.11
User Manual SIPLACE CS 1 Introduction
Software Version SR.408.xx 03/2006 US Edition 1.8 Abbreviations
15
1.8 Abbreviations
1
1
1
C&P 1 Collect&Place 1
C&P6 1 Collect&Place head with 6 segments 1
CO 1 Component 1
DCA 1 Direct Chip Attach 1
EGB 1 Electrostatically-sensitive group of components 1
ESD 1 Electrostatic sensitive device 1
FC 1 Flip chip 1
GND 1 Ground 1
IC 1 Integrated circuit 1
MC 1 Machine controller 1
P&P 1 Pick&Place 1
PCB 1 Printed circuit board 1
SC 1 Single conveyor 1
SC 1 Station computer 1
SMD 1 Surface mounted device 1
VS 1 Vision system 1
WPC 1 Waffle-pack changer 1
WT 1 Waffle-pack tray 1
WTC 1 Waffle-pack tray carrier 1