00194086-01.pdf - 第94页

3 Technical data User Manual SIPLACE CS 3.10 Nozzle changer for the 6-segment C ollect&Place head Software Version SR.408.xx03/2006 US Edition 94 Æ Pres s the mag azine so tha t it lies flat on the base, then releas …

User Manual SIPLACE CS 3 Technical data

Software Version SR.408.xx 03/2006 US Edition 3.10 Nozzle changer for the 6-segment Collect&Place head

3.10.6 Changing the magazine

Æ To remove the magazine, push the spring hook (item 1 in Fig. 3.10 - 4) away from the maga-

zine. Lift the magazine out of the carrier.

Fig. 3.10 - 4 Changing the magazine

(1) Spring hook

(2) Retaining clamp

(3) Centering hole

(4) Slot

(5) Carrier

(A) Push the spring hook away from the magazine

PLEASE NOTE

Make sure that you insert the magazine so that the centering pins slide into the centering hole

(item 3) and slot (item 4). 3

Æ First place the side of the magazine with the centering hole (item 3) and the slot (item 4) on

the base (5). The two knobs on the magazine must slide into the retaining clamp (item 2).

Æ Push the spring hook (item 1) away from the magazine.

3 Technical data User Manual SIPLACE CS

3.10 Nozzle changer for the 6-segment Collect&Place head Software Version SR.408.xx03/2006 US Edition

Æ Press the magazine so that it lies flat on the base, then release the spring hook. The spring

hook must latch into place.

3.10.7 Position detection

There is a position detection fiducial on every magazine.

Fig. 3.10 - 5 Nozzle changer - position detection

(1) Positioning fiducial

(2) Position of the nozzles in the magazine with respect to the positioning fiducial

User Manual SIPLACE CS 3 Technical data

Software Version SR.408.xx 03/2006 US Edition 3.11 PCB conveyor

3.11 PCB conveyor

3.11.1 Structure of the PCB conveyor

The placement machine is supplied with a PCB conveyor. The left or the right side of the PCB

conveyor can be used as the stationary side, as required.

Fig. 3.11 - 1 PCB conveyor

(1) Input conveyor

(2) Center conveyor

(3) Output conveyor

(4) Lifting table

(5) Width adjustment

(T) Direction of PCB transport