7OM-1603-006_w.pdf - 第129页
7OM-1603 3-24 Chapter 3 : 2. Menus for System Setting [2] T ray matrix reference set-up Select "Right" or "Left" in the text box. [3] T ray matrix initialization mode Select "Standard", &quo…
7OM-1603
Chapter 3 : 2. Menus for System Setting
3-23
For example
: The tray is in the condition as shown in FC17.
(Tray in Middle of Process)
×
:No Component
(Taken Out)
○
:Component Existing
3
1
2
99
･
･
･
2 199 ･ ･ ･ ･ ･ ･
X
Y
F7C22
•
The rst component pick-up position is assumed to be "X: 3, Y: 2".
●
: Component Picked Normally
○
: Component Left Behind
Shadowed : Miss-picked
Selection of "Y Direction"
3
1
2
99
･
･
･
2 199 ･ ･ ･ ･ ･ ･
X
Y
F7C23
3
1
2
99
･
･
･
2 199 ･ ･ ･ ･ ･ ･
X
Y
Selection of "X Direction"
F7C24
1102-003
7OM-1603
3-24
Chapter 3 : 2. Menus for System Setting
[2] Tray matrix reference set-up
Select "Right" or "Left" in the text box.
[3] Tray matrix initialization mode
Select "Standard", "Hold", or "Initialize" in the text box.
Standard
: When the tray matrix data is identical in its type or is not used
after a program change, it is not initialized.
When the ID is changed to a different one, the tray matrix data
is initialized to "0, 0".
Hold
: When the tray matrix data is identical in its type or is not used
after a program change, it is not initialized.
When the ID is changed to a different one, the tray matrix data
is initialized to "1, 1".
Initialize
: The tray matrix data used for the production model is all
initialized to "1, 1".
Cancel
: When this item is selected, the above selection is cancelled and
the previous "Tray Matrix Update" is returned.
[4] Diagonally inserted pallet detect
Whether or not the pallet incline-insertion detection is performed, is set in
this selection box.
1102-003
7OM-1603
1007-003 4-A
Chapter 4
Maintenance and Troubleshooting
This chapter describes periodic maintenance and troubleshooting for
those who are in charge of maintenance work.
1. Outline of Maintenance
2. Maintenance Check List
3. Maintenance Spots
4. Consumable and Servicing Parts