7OM-1603-006_w.pdf - 第81页

7OM-1603 2-12 Chapter 2 : 2. Menus for Automatic Operation 2.4 "Prod.Dt" Submenu This submenu is described taking an example where the multi-layer tray has been installed on the block No. 1. Production Data win…

100%1 / 195
7OM-1603
Chapter 2 : 2. Menus for Automatic Operation
2-11
2.3.3 "Altn Mode" Tab Sheet
The corresponding window makes it possible to set parameters for the magazine
alternate mode.
[1]
[2]
[3]
[4]
"Altn Mode" Tab sheet (Multi-Layer Tray Feeder #1 Used) F7B11
[1] [Tray Mgzn.] Button
When pressed, this button opens the "Altn Tray Mag" window.
[2] Altn Tray Mag Mode
[Enable] Button
: When selected, this button validates the magazine
alternate mode.
[Disable] Button
: When selected, this button invalidates the
magazine alternate mode.
[3] Order of Priority
[Mag #1] Button
: When this button is pressed, the components in
Magazine #1 are used prior to the others.
[Mag #2] Button
: When this button is pressed, the components in
Magazine #2 are used prior to the others.
[4] [Apply], [Cancel] Button
Using these buttons, the parameter set in the [2] or [3] is reected on the
machine operation or cancelled.
1102-003
7OM-1603
2-12
Chapter 2 : 2. Menus for Automatic Operation
2.4 "Prod.Dt" Submenu
This submenu is described taking an example where the multi-layer tray has been
installed on the block No. 1.
Production Data window F7B12
The "Prod.Dt" window is provided with the "PP.Data" window, "Comp Lbry"
window and "Temp.Chng.Comp Lbry" window.
Reference
Refer to "Chapter 2 Pattern Program" in the Vol. 2 of the Instruction Manual for
the Main Machine, for the detailed description of the "PP.Data" window.
Graphic
Development
1109-004
7OM-1603
Chapter 2 : 2. Menus for Automatic Operation
2-13
1109-001
2.4.1 Outline of Pattern Program
The pattern program for the multi-layer tray feeder is composed of the following
data.
Note
The shadowed (gray) items are related to the multi-layer tray feeder.
Pattern Program
Pattern Program Name
Operation Data
Placement Head/Nozzle Data
Placement Feeder Location
Component ID
Block 1
Component Library
Tray
Tray Step
(F02)
(F03)
Placement Data
Handling/Placement Data
Composition of Pattern Program F7B12-1
Note
(F02), and (F03) which follow the item names show the item Nos.
to be referred to.