7OM-1603-006_w.pdf - 第44页
7OM-1603 Chapter 1 : 1. Outline 1-3 Item Descriptio n Notes : (a) "t1" or "t2" (" Note a" in the above table) is mo re than 8 mm and 14 m m or le ss in height (th i ckness), keep t h e upper…
7OM-1603
1-2
Chapter 1 : 1. Outline
Item Description
3. Applicable Tray
JEDEC Size Multi-Layer Tray Feeder (GS-FP100)
a b t1 t2 S (Leeway) Mass
Min. 100 100 3 3
Note f
－ －
Max. 136 323 30
Note a
Note e
30
Note a
Note e
－
Note b
2 kg
Note c
FULL Size Multi-Layer Tray Feeder (GS-FP200)
a b T1 t2 S (Leeway) Mass
Min. 100 100 3 3
Note f
－ －
Max. 230 330 30
Note a
Note e
30
Note a
Note e
－
Note b
2 kg
Note c
Unit : mm
Unit : mm
T7A2
1003-002
7OM-1603
Chapter 1 : 1. Outline
1-3
Item Description
Notes : (a) "t1" or "t2" ("Note a" in the above table) is more than 8 mm and
14 mm or less in height (thi ckness), keep the upper pallet empty
for such components.
(b) "S (Leeway)" becomes "Max. 0.5 mm" when the outer
dimensions of the mold is "9 × 9 mm" or less.
(c) The mass of components and the tray fixing magnet is included.
(d) Some trays cannot be used due to the mechanical characteristics.
(e) When the tray where "t1" or "t2" value exceeds 14 mm, is to be
handled, the multi-functional head is required.
(f) In the case that "t2" value is less than 3 mm, the middle-size
odd shaped nozzle (option) is required.
4. Applicable
Components
Applicable Components
• Flat Packaged ICs
• Connector
• Other similar-shaped components
t
a
d
b
c
Unit : mm
Notes : (a) In the case of connector, up to 100 × 26 mm can be handle.
(b) The irregular-shaped components can also be used when an
optional device is provided.
(c) Some components cannot be used due to the mechanical
characteristic.
(d) When the component size (a × b) exceeds "44 × 44 mm" the
multifunctional heads (option) are required.
(e) In the case that the "t" va lue exceeds 12.7 mm, the multi-
functional head (option) is required.
5. Number of
Installable Types
of Components
Max. 9 types / pallet (used under programming)
• When the magazine (GS-MG100) is used : 270 types
a b c d t Lead End
Thickness
Mass
Min. 7 7 5 5 - 0.10 -
Max. 55
Note d
55
Note d
52 52 25.4
Note e
-
20 g
T7A3
1109-003
7OM-1603
1-4
Chapter 1 : 1. Outline
noitpircseD metI
6. Tray
Arrangement
Notes : (a) No tray should be put in the shadowed area.
Note : In the case of the multi-functional head (GS-MH100), the components
with the size range of over 131 mm can not be picked up.
Note : In the case of the multi-functional head (GS-MH100), the components
with the size range of over 218.5 mm can not bepicked up.
(b) In the case of the multi-functional head (GS-MH100), the
components with the size range of over 131 mm can not be
picked up.
(c) In the case of the multi-functional head (GS-MH100), the
components with the size range of over 218.5 mm can not be
picked up.
JEDEC Size Multi-Layer Tray Feeder (GS-FP100)
FULL Size Multi-Layer Tray Feeder (GS-FP200)
7. Installable
Number
of Pallets
Max. 15 pallets / magazine × 2 magazines
Note : The number of installable pallets is limited, depending upon the tray
height.
Area where no
tray should be put
Pallet origin
Pallet
Tray
Note
T7A4
1109-004