7OM-1603-006_w.pdf - 第28页

Safe-17 Safety Precautions 7OM-1603 No. Alert Labels and Description (10) Description  Do not put your hand in the moving area while the feeder base is moving up or down. During the ashing of the feeder ready switch LE…

100%1 / 195
Safe-16
Safety Precautions
7OM-1603
No. Alert Labels and Description
(7)
10-0287A
Be Careful because the
machine might down.
Description
When the elevator unit is to be moved, pay attention the inclination of the oor and
difference in level.
If the oor is inclined 10/1000 mm or more, the elevator might fall down, which
might cause a serious accident.
(8)
Description
Permanent magnets are used in the tape feeding and cover tape take-up sections of
the tape feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape
feeders. Otherwise, the pacemaker may be affected by magnetism, causing a serious
accident.
(9)
10-0264-
Avoid dropping a feeder!
It is heavy and if dropped, an injury will result.
Hold the grip during the work.
Description
Do not drop a feeder. Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each cutter one by one and do not drop any.
1109-005
5. Alert Labels
Safe-17
Safety Precautions
7OM-1603
No. Alert Labels and Description
(10)
Description
Do not put your hand in the moving area while the feeder base is moving up or
down.
During the ashing of the feeder ready switch LED, the feeder base is lifted. At that
time, your hand might be caught in the moving section and get injured.
(11)
10-0282-
Pay attention to the moving
mechanisms!
Do not put your hand in the moving area.
Otherwise, your hand might be caught in
the moving area and injured.
Description
Be careful not to get caught.
Otherwise, your hand might be caught in the moving area and injured.
(12)
10-0265-
Be careful with the cutter
blade. Otherwise, your finger
might be cut and injured.
Do not touch the cutter blade.
Only service personnel who has completed
the maintenance training course for the
cutter blade replacement, shall replace
the cutter blade.
Description
Only the service personnel who has completed the maintenance training for the
cutter blade replacement, should change the cutter blades.
Otherwise, an injury on hand might be caused with the cutter blade.
1109-003
5. Alert Labels
Safe-18
Safety Precautions
7OM-1603
No. Alert Labels and Description
(13)
10-0278-
Avoid dropping a cutter!
It is heavy and if dropped, an injury will result.
Remove or attach the cutter unit with the
handle securely held.
Description
Do not drop a cutter. Otherwise, a foot injury will result or the cutter itself may be
damaged.
Carefully handle each cutter one by one and do not drop any.
(14)
Description
Do not put any feeder sideways nor tools on the feeder bases. Otherwise, the
machine will break down.
(15)
10-0298-
kg
Description
Because the magazine is heavy, take care handling it when it is moved. Otherwise,
you might injure your arm or waist.
1109-003
5. Alert Labels