00196770-04_VD_SSW_705_04_SP2_DE_EN.pdf - 第24页

Station Software 705.04 SP2 / Version De scription Ausgabe 06/2012 Edition 8 Corrected errors The 705.04 SP2 station software versi on contains all the error corrections of the previous versions 701.01 – 705.04 SP1. Addi…

Station Software 705.04 SP2 / Version Description Ausgabe 06/2012 Edition

Teaching of placement positions during placement

– Viewing the whole line, it is not possible to teach all placement positions of a board on a single

placement machine. Only the placement positions that in fact are placed on a station are listed

for selection. I.e., in order to correct all placement positions, the board has to be moved

through the whole line.

– No integrity check is performed at the station after the teaching action. As the station restores

to SIPLACE Pro and a download subsequently takes place to the other placement machines,

an integrity check is performed by SIPLACE Pro. This might fail, if it is impossible to go to the

resulting placement positions.

Brightness calibration of digital camera systems

– Only conveyor lane 1 is used for the FCCS calibration.

– No teaching of fiducial positions or structures on the calibrating jigs.

– No FCCS calibration for a line, solely for a single machine.

No machine stop at "track empty" errors in I-placement mode

– If the Machine stop at pickup error option is deactivated, no machine stop errors caused by

pickup errors are transmitted to OIS and Explorer. In this case, the reporting of idle times

caused by pickup errors is not possible anymore.

– If the placement machine does not stop it may happen that it in fact does not place anymore (it

waits for he feeders to be filled) but is not stopped either (e.g. boards might still be loaded).

This state is then displayed as "Producing" and not as stopped in OIS.

Set indicator lamp

The feature is only supported on the SX-series and DX-series placement machines.

Adjustable minimum track width

– The feature is only supported on the SX-series and DX-series placement machines.

– In the Quad Lane conveyor mode there is only one adjustable value for each track pair.

Random setup for tray feeders

The feature only works in combination with SIPLACE Setup Center.

Automatic storage of feeder parameters

– Due to the system the feature cannot currently be reasonably used for:

– recipe-based production (PCB barcode)

– station wise download

Station Software 705.04 SP2 / Version Description Ausgabe 06/2012 Edition

8 Corrected errors

The 705.04 SP2 station software version contains all the error corrections of the previous versions

701.01 – 705.04 SP1. Additionally, the following errors have been corrected in this version:

Error no. Error description

D1-62055103 Incorrect control of the lamp indicators.

D1-66221447 The zero point corrections could not be transferred to the software by the

intermediate distributor.

D1-66510192 An error was displayed on an 2x8 mm feeder (red LED). In spite of this, the

machine picked up from this feeder.

D1-67655607

D1-69213143

D1-70140490

Error message "Cover foil broken: component:" was still displayed after the

error had been fixed.

D1-67778301

D16058-4811

D16120-2861

Problems while measuring the component via the stationary camera. In order

to avoid scattered light, the component sensor of the CPP head will therefore

be switched off before the component centering with the stationary camera or

the coplanarity measurement take place.

D1-68389204 Field test 705.04.SP1: Software hung up during production.

D1-68686001

D16275-119525

Possibility of placing wrong components in partial setups.

D1-68715501 The machine reported a fatal error after a pickup error.

D1-68759501 Component broke during dipping process.

D1-68778701 Sporadically, a hardware warning was displayed after reboot.

D1-68824501

D1-69455601

D1-69693501

D1-70795701

D1-70822701

D1-70844901

D1-71124601

D1-71551914

Hardware warning not significant.

D1-68887201

D1-69192130

Pickup problems with selected segments. After a reference run it was ok.

D1-69038301 The station software hung up after the operator tried to reactivate an

automatically deactivated segment on a C&P20 head.

D1-69038350 A software protection fault occurred on an X4I placement machine.

D1-69038398 Protocol violation when HCU controlled the C&P20 DP axes (embedded SW +

station software).

D1-69151101 SX placement machines: HCU does not answer and communication is

interrupted; after a short period of time it is reactivated (embedded SW).

D1-69183313

D16334-2955

Unhandled exception on an SX2 placement machine. This happened when

referencing the star axis manually failed.

D1-69183365 Feeder warnings were displayed on the screen although everything was

working well.

Station Software 705.04 SP2 / Version Description Ausgabe 06/2012 Edition

D1-69191553 Machine stopped during placement with an exception and needed a reboot

(when placing high components out of MTC).

D1-69279620

D1-70795738

An orange icon for feeder mismatch was displayed on the GUI but no

difference was visible.

D1-69413619

D16159-2426

It was possible to adjust the feeder pitch on the Operator activity level.

D1-69439913

D1-68775501

D16159-2426

A CPP placement head touched the placed board on an X4 placement

machine.

D1-69803411 Problem with Language Pack. Characters were not readable after switching

from English to Polish.

D1-70436501 On an SX4 placement machine an axis warning was displayed after the

reference run during booting.

D1-70445512 The pressure control valve blew a 0201 component out of the component

pocket.

D1-70811301 "Reading barcode" in the "Manual Operations" did not work for PCB Barcode

with PCB camera.

D1-71020801 A 01005 component was incorrectly placed because of faulty tolerance class.

D1-71187163

D1-60414201

D1-68210501

D1-70474001

D1-71103401

A CPP placement head placed a 0201 component with high force. Thereafter,

the component stuck in the nozzle.

D1-71621601 Incoming SMEMA signals were not evaluated on the GUI.

D1-71692897 The required function (changing fixed conveyor rail) was not performed, if the

machine was in production mode before and the operator then clicked on

"Stop production - Restart" in the latest function.

D1-72081601 The station software hung up after a software update.

D1-72982411 When a component shape was taught in the component shape wizard after

having upgraded the station software, the tolerance fell to 1% of the overall

size.

D1-73008901 As a second gantry was re-railed on an SX2 placement machine and the GCU

was not plugged, the machine was operated as an SX1. If gantry 1 then was

moved to the service position it could possibly touch gantry 2.

D1-73492701 Teaching of placement position and placing with high force did not work

together.

D1-73635751 The machine started with an unspecified hardware error for the conveyor E/A

module.

D1-73966879 The machine reported communication failure between two Y-axes.

D1-74037741 After components were taught in Chinese language, the station software hung

up during the robustness analysis.

D1-75321705 Error messages 30507 (hardware warning) and 30576 (unspecified hardware

error) were displayed when the machine was started.

D16006-11801 On an SX-series placement machine the tables could not be removed for a

setup change.

D16120-4012 An SX4 placement machine with hung up during vacuum tooling.

D16198-8327 Bad quality of a placed board (missing components and spattering).