Portal_Manual_1.2.1_Rev_H-1.pdf - 第9页
Portal PVA Revisio n H ( 2018 ) 9 of 93 1.2 Safety Warn ing symbo ls on the machine cor respond to not ations in t his manual . Befor e operating the system, iden tify these warning labels and read the notices d escribed…
Portal
PVA
Revision H (2018)
8 of 93
1.1 Document History
Revision
Revision Date
Reason for Changes
REV I
11/2018
REV H
09/2016
FIS Update
REV G
2016
Part Manager and Quick Fid, Portal Version 1.2.0
REV F
2016
UV Warning updated
Rev E
2014
Portal Version 1.1.0
Rev D
2013
New Template
Rev C
2012
Grammar revised, Portal Version 1.0.7
Rev B
Content update
Rev A
Initial release
Original Version
NOTE: All photographs and CAD model representations in this document are a
“general representation” of the system and its components. The actual appearance of
the system and its components can differ based upon customer specific configuration.
Portal
PVA
Revision H (2018)
9 of 93
1.2 Safety
Warning symbols on the machine correspond to notations in this manual. Before
operating the system, identify these warning labels and read the notices described
below. Not all labels may be used on any specific system. Read the workcell manual for
additional safety information related to the workcell and its components.
WARNING! The safety features should NEVER be bypassed, disabled, or
tampered with. PVA is not responsible for any damages incurred, mechanical
or human, because of alteration or destruction of any safety features. If the
equipment is used in a manner not specified by PVA, the protection provided by
the equipment may be impaired.
In situations where inattention could cause either personal injury or
damage to equipment, a warning notice is used.
Always wear approved safety glasses when you operate or work
near the workcell.
Before you operate the workcell, read and understand the manuals
provided with the workcell.
Never put hands or tools in areas with this symbol when the workcell
is in operation. A dangerous condition may exist.
Read and understand the manuals provided with the workcell before
any repair or maintenance is done. Only a qualified individual should
do service.
Use caution when near pressurized vessels. Find and repair any leaks
immediately. Always wear applicable safety equipment when you
work with pressurized vessels or vessels that contain chemicals.
Shear hazard from moving parts. Avoid contact.
Portal
PVA
Revision H (2018)
10 of 93
Do not smoke near the workcell. Always have a fire extinguisher
available for emergency use.
Before any repair or maintenance to the system is done, turn off
power and lockout the power disconnect switch.
Warning notices are used to emphasize that hazardous voltages,
currents, temperatures, or other conditions that could cause
personal injury exist in this equipment or may be associated with its
use. Only qualified personnel should enter areas designated with this
symbol.
A laser light source is present. Do not stare directly into the beam.
Do not use in the presence of highly reflective surfaces.
Pinch hazard from moving parts. Avoid contact.
Hot surface. Avoid contact.
Do not remove protective guarding.
Warning, UV light hazard. Do not look directly at UV light source.