ASM-X-Spec-SX12V2-EN-DMS.pdf - 第16页
16 Placement Heads SIPLACE SX1/SX2 SIPLACE SpeedStar (C&P20) SIPLACE S peedS t ar component camera type 23 (C&P20) SIPLACE S peedS tar component camera type 41 (C&P20) Component range a a) Please note that th…
15
Placement Heads SIPLACE SX1/SX2
Standard Functions / Options
SIPLACE SpeedStar (C&P20) SIPLACE MultiStar (CPP)
Standard-
functions
High-resolution camera, vacuum
sensor, force measurement,
component sensor, integrated
turning station per segment,
PCB warpage check, individual
image of each component
Standard-
functions
High-resolution camera, vac-
uum sensor, force measure-
ment, component sensor,
integrated turning station per
segment, PCB warpage check,
individual image of each com-
ponent
Options Nozzle changer, special nozzles Options Nozzle changer, special noz-
zles, high-resolution head cam-
era for 01005 components,
stationary fine pitch camera
SIPLACE TwinStar (TH)
Standard-
functions
Stationary fine pitch camera,
vacuum sensor, force measure-
ment, nozzle changer, PCB war-
page check, individual image of
each component
Options Stationary flip chip camera, spe-
cial nozzles, grippers
16
Placement Heads SIPLACE SX1/SX2
SIPLACE SpeedStar (C&P20)
SIPLACE SpeedStar component
camera type 23 (C&P20)
SIPLACE SpeedStar component
camera type 41 (C&P20)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-spe-
cific standards, the component packaging tolerances and the component tolerances.
01005 to 2220, Melf, SOT, SOD 01005 to 2220, Melf, SOT, SOD,
Bare-Die, Flip-Chip
Component spec.
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
4 mm
0.25 mm
0.1 mm
0.4 mm
0.2 mm
0.4 mm x 0.2 mm
6 mm x 6 mm
1 g
4 mm
0.08 mm
0.03 mm
0.10 mm
0.05 mm
0.12 mm x 0.12 mm
6 mm x 6 mm
1 g
Programmable set-down
force
1.5 N - 4.5 N 1.5 N - 4.5 N
Nozzle types 10xx, 11xx, 12xx 10xx, 11xx, 12xx
X/Y accuracy
b
b) Accuracy values measured in accordance with vendor-neutral IPC standard.
± 41 µm/3
± 55 µm/4
± 41 µm/3
± 55 µm/4
Angular accuracy ± 0.5° / 3
± 0.7° / 4
± 0.5° / 3
± 0.7° / 4
Illumination levels 5 5
Possible illumination
level settings?
256
5
256
5
17
Placement Heads SIPLACE SX1/SX2
SIPLACE MultiStar (CPP)
SIPLACE MultiStar
component camera type 30 (CPP)
SIPLACE MultiStar
component camera type 33(CPP)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-spe-
cific standards, the component packaging tolerances and the component tolerances.
01005 to 27 mm x 27 mm 0402 to 50 mm x 40 mm
Component spec.
max height
b
max. height
c
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
b) CPP head: in low installation position (stationary component camera not possible).
c) CPP head: in high installation position
6.0 mm
8.5 mm
0.3 mm
0.15 mm
0.25 mm
d
0.35 mm
e
0.14 mm
d
0.20 mm
e
0.4 mm x 0.2 mm
27 mm x 27 mm
4 g
d) For CO < 18 mm x 18 mm
e) For CO ≥ 18 mm x18 mm
11.5 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 mm x 0.5 mm
50 mm x 40 mm
8 g
Programmable set-down
force
1.0 - 10 N 1.0 - 10 N
Nozzle types 20xx, 28xx 20xx, 28xx
X/Y accuracy
f
f) Accuracy values measured in accordance with vendor-neutral IPC standard.
± 41 µm/3
± 55 µm/4
± 34 µm/3
± 45 µm/4
Angular accuracy ± 0.4° / 3
g
, ± 0.5° / 3
h
± 0.5° / 4
g
, ± 0.7° / 4
h
g) Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
h) Component dimensions smaller than 6 mm x 6 mm.
± 0.2° / 3
± 0.3° / 4
Illumination levels 5 6
Possible illumination
level settings?
256
5
256
6