ASM-X-Spec-SX12V2-EN-DMS.pdf - 第19页

19 Placement Heads SIPLACE SX1/SX2 SIPLACE TwinStar (TH) SIPLACE T winS tar Fine-pitch camera (component camera type 33 ) SIPLACE TwinStar Flip chip camera (option) (component camera type 25 ) Component range a a) Please…

Placement Heads SIPLACE SX1/SX2

SIPLACE MultiStar (CPP)

Increased performance and flexibility

The SIPLACE Multistar is the

perfect SIPLACE solution:

• In an increasingly complex

production environment

• For an increasing diversity

of setup and production

strategies

• For a wide spectrum of

components

• For frequent product

changeovers.

It is even possible to place

larger components without a

noticeable drop in perfor-

mance. The SIPLACE Multi-

star is perfectly designed for

integration into a flexible and

speed-optimized production

environment.

One head for all applica-

tions

• The SIPLACE MultiStar

offers top flexibility

• It combines

Collect&Place mode with

Pick&Place mode

One head supports three

placement modes:

Elimination of bottlenecks

• A wider component spec-

trum

• Optimum performance uti-

lization

• More feeder tracks for the

TwinStar

• Improved throughput due

to perfect line utilization

• More products in one set-

up family

Throughput

• Up to 23,000 components/

h benchmark value

• Up to 19,000 components/

h IPC 9850 performance

Collect&Place mode

Pick&Place mode

Mixed mode

Placement Heads SIPLACE SX1/SX2

SIPLACE TwinStar (TH)

SIPLACE TwinStar

Fine-pitch camera

(component camera type 33)

SIPLACE TwinStar

Flip chip camera (option)

(component camera type 25)

Component range

a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards, the

component packaging tolerances and the component tolerances.

0402 to SO, PLCC, QFP, BGA, special

components, bare dies, flip-chips

0201 to SO, PLCC, QFP, sockets,

plugs, BGA, special components, bare

dies, flip-chips, shields

Component specs

max. height

min. lead pitch

min. lead width

min. ball pitch

min. ball diameter

min. dimensions

max. dimensions

max. weight

b) If the MultiStar and TwinStar are combined in the same placement area, the maximum component height may be restricted.

c) Max. component height 30 mm, Very High Force Pick&Place (VHF) or nozzle type 508 available on request

d) If standard nozzles are used.

25 mm

0.3 mm

0.15 mm

0.35 mm

0.2 mm

1.0mm x 0.5mm

55 mm x 45 mm (single measurement)

For operation with two nozzles:

50 mm x 50 mm or 69 mm x 10 mm

For use with one nozzle:

78 mm x 78 mm or 110 mm x 10 mm

up to 200 mm x 110 mm (with restrictions)

100 g

25 mm

0.25 mm

0.1 mm

0.14 mm

0.08 mm

0.6mm x 0.3mm

16 mm x 16 mm (single measurement)

55 mm x 55 mm (multiple measure-

ment)

100 g

Programmable set-down

force

1.0 N - 15 N

2.0 N - 30 N

2.0 N - 70 N

e) SIPLACE High-Force Head.

f) Very High Force Pick&Place (VHF) available on request

1.0 N - 15 N

2.0 N - 30 N

2.0 N - 70 N

Nozzle types

g) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.

5xx (standard)

4xx + adapter

8xx + adapter

9xx + adapter

gripper

5xx (standard)

4xx + adapter

8xx + adapter

9xx + adapter

gripper

Nozzle spacing for P&P

heads

70.8 mm 70.8 mm

X/Y accuracy

h) Accuracy values measured in accordance with vendor-neutral IPC standard.

± 26 µm/3± 35 µm/4 ± 22 µm/3± 30 µm/4

Angular accuracy ± 0.05° / 3± 0.07°/ 4 ± 0.05° / 3± 0.07° / 4

Illumination levels 6 6

Possible illumination level

settings

256

Placement Heads SIPLACE SX1/SX2

Nozzle changer

Nozzle changer for the SIPLACE SpeedStar

Nozzle changer for the SIPLACE MultiStar

Nozzle changer for the SIPLACE TwinStar

Magazine for 12

type 10xx, 11xx or 12xx nozzles

Magazines for 9

nozzles of type 28xx

Magazines for 12

nozzles of type 20xx

Magazine for two standard nozzles

Magazine for one special nozzle, gripper

Description

Nozzle changers increase the flexibility of the placement heads when it comes to processing

different components. The nozzle configuration can be rapidly adjusted to changing place-

ment jobs. Precisely defined positions and perfect nozzle seat in the garage ensure minimum

radial eccentricity on the placement head.

The nozzle changers are equipped with inbuilt monitors which check whether the nozzle mag-

azine is seated correctly on the mount. In addition, the nozzle changers recognize whether

the magazines are for 10xx, 20xx or 28xx nozzles by the code.