ASM-X-Spec-SX12V2-EN-DMS.pdf - 第57页
57 Technical Data SIPLACE SX1/SX2 Placement System Dimensions Placement System Center of Gravity X = 0 mm Y = 0 mm Z = 738.5 mm
56
Technical Data SIPLACE SX1/SX2
Dimensions and Setup Conditions
Machine length 1500 mm
Machine width
a
over the two docked component trolleys and bottom handles
including monitors and keyboards
a) 1 component trolley inside and 1 component trolley outside with handles folded down.
2475 mm
2854 mm
Height of the machine
with indicator lamp
with folded-up protective covers
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
max. 1765 mm
1980 mm
2010 mm
2030 mm
Machine ground clearance
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
120 mm ± 15 mm
150 mm ± 15 mm
170 mm ± 15 mm
Weight
b
SX1 with 2x component trolley 60
SX1 with 2x component trolley 60 (fully configured)
SX2 with 2x component trolley 60
SX2 with 2x component trolley 60 (fully configured)
b) 1 component trolley inside, 1 component trolley outside and single conveyor.
2482 kg
2806 kg
2532 kg
2856 kg
Location
a
SIPLACE SX1/SX2 with 2x component trolley 60 3.71 m²
Load per unit area
b
The load per unit area calculation included an additional working
space of 0.5 m on each side of the machine.
SIPLACE SX1
SIPLACE SX2
6.1 kN/m²
6.2 kN/m²
Load per unit area
b
The load per unit area calculation includes an additional working
space of 1.0 m on each side of the machine.
SIPLACE SX1
SIPLACE SX2
4.7 kN/m²
4.8 kN/m²
Number of machine feet 4
Maximum noise emissions 75 dB (A)
Room temperature between 15°C and 35°C
Atmospheric humidity 30% to 75 % (no higher than 45% on aver-
age to prevent any possibility of condensa-
tion on the machine)
57
Technical Data SIPLACE SX1/SX2
Placement System Dimensions
Placement System Center of Gravity
X = 0 mm
Y = 0 mm
Z = 738.5 mm
58
Technical Data SIPLACE SX1/SX2
Maneuvering Radii for the Component Trolleys
Component trolley Location 1 (outside) Location 2 (inside)
Maneuvering radius R
Handles folded out 1200 mm 1200 mm
Distance L1: Machine center to outer edge of component
trolley
Handles folded in 1300 mm 1175 mm
Handles folded out 1750 mm 1625 mm
Distance L2: Machine center to wall
Handles folded in 2060 mm 1935 mm
Handles folded out 2950 mm 2825 mm