ASM-X-Spec-SX12V2-EN-DMS.pdf - 第29页

29 Component Provision SIPLACE SX1/SX2 Component trolley Technical Data Component trolley dimen sions Component trolley with 6 0 tracks ( length x widt h) Component trolley with 3 0 tracks ( length x widt h) 760 mm x 864…

Component Provision SIPLACE SX1/SX2

Component trolley

SIPLACE SX

The SIPLACE SX compo-

nent trolleys are independent

and easily maneuverable

modules. The SIPLACE SX

machines can accommodate

two component trolleys, each

with 60 tracks. If a WPC5/

WPC6 is set up at one of the

locations, the other location

can accommodate a compo-

nent trolley with 30 tracks.

The tape reels are taken up

into the tape container of the

component trolley. A cutting

device on the machine auto-

matically cuts the used tape

material. The component

trolleys can be set up directly

on the machine or at an

external setup area with

feeder modules. The benefits

of offline setup are that the

configurations can be pre-

pared without stopping the

line. This allows the setup to

be changed very quickly

using the changeover table

principle. The SIPLACE SX

component trolleys also sup-

port fast setting up and tear-

ing down of feeder modules

even during the placement

process.

The component feeders are

at rest during the placement

process - allowing tapes to

be spliced without stopping

the machine. With the help of

an optional component bar-

code reader and the Setup

Center option, the barcodes

on the tape reels can be read

and checked.

This ensures the correct

assignment of components

to tracks and the traceability

of PCB placement with the

Traceability software.

For safety reasons, unoccu-

pied locations are fitted with

so-called dummy feeder

modules.

Component trolley SIPLACE SX

Tape container

Waste container for remaining

empty tape

Changeover table

Component Provision SIPLACE SX1/SX2

Component trolley

Technical Data

Component trolley dimensions

Component trolley with 60 tracks (length x

width)

Component trolley with 30 tracks (length x

width)

760 mm x 864 mm

760 mm x 471 mm

Height with folded-up handles

900 mm (PCB transport height:

930 mm (PCB transport height:

950 mm (PCB transport height:

934 mm

964 mm

984 mm

Weight of component trolley with 60 tracks

without feeder modules

fully configured with feeder modules

Weight of component trolley with 30 tracks

without feeder modules

fully configured with feeder modules

104 kg

266 kg

76 kg

157 kg

Tape reel diameter

Standard

maximum

up to 432 mm (17")

483 mm (19")

Locations for feeder modules

Component trolley with 60 tracks

Component trolley with 30 tracks

60 feeders with 8 mm

30 feeders with 8 mm

Changeover time for component trolley < 1 minute

Max. component feeding

(2 component trolleys on the SIPLACE SX)

2 component trolleys with tape reel holder and

integral waste bins:

When using a Waffle Pack Changer:

120 locations for feeder modules, each 8 mm.

90 locations for feeder modules, each 8 mm.

Feeder module types (SIPLACE X)

With adapter

Tape feeder modules, reject conveyor, stick mag-

azine and label feeder.

Feeding capacity

(2 component trolleys on the SIPLACE SX)

120 4 mm X feeder modules

120 8 mm X feeder modules

60 tape feeder modules Smart Feeder 2x8 mm X

60 tape feeder modules Smart Feeder 12 mm X

60 tape feeder modules,Smart Feeder 16 mm X

40 24 mm X feeder modules

30 32 mm X feeder modules

24 44 mm X feeder modules

20 56 mm X feeder modules

16 72 mm X feeder modules

12 88 mm X feeder modules

Component Provision SIPLACE SX1/SX2

X Tape Feeder Modules

SIPLACE X tape feeder

modules are intelligent tape

feeder modules for flexible

production environments,

which simplify upgrading and

conversion tasks consider-

ably. All SIPLACE X feeder

modules support tape splic-

ing as a standard, which pre-

vents machine stoppages

when refilling.

The benefits at a glance:

Conversion-friendly

• The SIPLACE X tape

feeder modules are

designed as single-track

feeder modules. This min-

imizes any restrictions

during conversion.

• Omega profiles on the

tape feeder module and

table facilitate safe and

reliable upgrading and

conversion of tape feeder

modules during ongoing

production.

Robust

• Brushless motors extend

the service life of the X

tape feeder modules.

Intelligent

• A unique tape feeder mod-

ule ID ensures a precise

assignment of the compo-

nent to the tape feeder

module. This makes reli-

able setup verification

very simple.

• Component pitch, feeder

speed and other functions

are automatically set

when the setup program is

downloaded.

High feeding accuracy

• Closed loop control path

measurement ensures

highly accurate compo-

nent feeding, even for

01005 placements.

Operator-friendly

• Contactless data and

power transmission make

it easier to attach/remove

the tape feeder modules

• A menu-controlled LCD or

LED display supports the

user with current informa-

tion.

• A multicolor status display

signals the operating sta-

tuses of the X tape feeder

module:

- Green: "Ready for

operation/in current

setup"

- Orange: "Compo-

nent runs empty"

- Red: "Malfunction"

- LED off: "Tape feed-

er module is not in

current setup and can

be torn down"

a) 01005-compliant

b) In 4mm increments

Technical Data

Tape feeder

module

L x H

[mm]

Width

[mm]

Loca-

tion

Transport

increment

[mm]

Max. tape

height

[mm]

4 mm X 587x200 10,8 1 1 1,1

8 mm X

587x200 10,8 1 1/2/4/8 3,5

Smart 2x8 mm X 587x200 22,9 2 1/2/4/8 3,5

Smart 12 mm X 587x200 22,6 2 4 - 16

Smart 16 mm X 587x200 22,6 2 4 - 20

24 mm X 587x200 34,4 3 4 - 32

32 mm X 587x200 46,2 4 4 - 40

44 mm X 587x200 58,0 5 4 - 52

56 mm X 587x200 69,8 6 4 - 64

72 mm X 587x200 81,6 7 4 - 80

88 mm X 587x200 105,2 9 4 - 96

Tape reels 178 to 483 mm in diameter (7“ - 19“)

Changeover time 8 s