ASM-X-Spec-SX12V2-EN-DMS.pdf - 第20页

20 Placement Heads SIPLACE SX1/SX2 Nozzle changer Nozzle changer for th e SIPLACE SpeedSt ar Nozzle changer for the SIPLACE MultiSt ar Nozzle changer for the SIPLACE T winS t ar Magazine for 12 type 10xx, 11xx or 12xx no…

100%1 / 80
19
Placement Heads SIPLACE SX1/SX2
SIPLACE TwinStar (TH)
SIPLACE TwinStar
Fine-pitch camera
(component camera type 33)
SIPLACE TwinStar
Flip chip camera (option)
(component camera type 25)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards, the
component packaging tolerances and the component tolerances.
0402 to SO, PLCC, QFP, BGA, special
components, bare dies, flip-chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components, bare
dies, flip-chips, shields
Component specs
b
max. height
c
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
d
b) If the MultiStar and TwinStar are combined in the same placement area, the maximum component height may be restricted.
c) Max. component height 30 mm, Very High Force Pick&Place (VHF) or nozzle type 508 available on request
d) If standard nozzles are used.
25 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0mm x 0.5mm
55 mm x 45 mm (single measurement)
For operation with two nozzles:
50 mm x 50 mm or 69 mm x 10 mm
For use with one nozzle:
78 mm x 78 mm or 110 mm x 10 mm
up to 200 mm x 110 mm (with restrictions)
100 g
25 mm
0.25 mm
0.1 mm
0.14 mm
0.08 mm
0.6mm x 0.3mm
16 mm x 16 mm (single measurement)
55 mm x 55 mm (multiple measure-
ment)
100 g
Programmable set-down
force
1.0 N - 15 N
2.0 N - 30 N
e
2.0 N - 70 N
f
e) SIPLACE High-Force Head.
f) Very High Force Pick&Place (VHF) available on request
1.0 N - 15 N
2.0 N - 30 N
e
2.0 N - 70 N
f
Nozzle types
g
g) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
gripper
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
gripper
Nozzle spacing for P&P
heads
70.8 mm 70.8 mm
X/Y accuracy
h
h) Accuracy values measured in accordance with vendor-neutral IPC standard.
± 26 µm/3± 35 µm/4 ± 22 µm/3± 30 µm/4
Angular accuracy ± 0.05° / 3± 0.07°/ 4 ± 0.05° / 3± 0.07° / 4
Illumination levels 6 6
Possible illumination level
settings
256
6
256
6
20
Placement Heads SIPLACE SX1/SX2
Nozzle changer
Nozzle changer for the SIPLACE SpeedStar
Nozzle changer for the SIPLACE MultiStar
Nozzle changer for the SIPLACE TwinStar
Magazine for 12
type 10xx, 11xx or 12xx nozzles
Description
Nozzle changers increase the flexibility of the placement heads when it comes to processing
different components. The nozzle configuration can be rapidly adjusted to changing place-
ment jobs. Precisely defined positions and perfect nozzle seat in the garage ensure minimum
radial eccentricity on the placement head.
The nozzle changers are equipped with inbuilt monitors which check whether the nozzle mag-
azine is seated correctly on the mount. In addition, the nozzle changers recognize whether
the magazines are for 10xx, 20xx or 28xx nozzles by the code.
21
Placement Heads SIPLACE SX1/SX2
Nozzle changer
Technical Data
Note: When you use the Smart Pin Support option, the maximum number of nozzle changer mag-
azines is reduced.
Nozzle changer for the SIPLACE SpeedStar
Dimensions (length x width x height) 314 mm x 94.5 mm x 68.6 mm
Number of magazines 4
a
a) All magazines in the nozzle changer must be configured.
Number of nozzle garages 48
Standard configuration 4 magazines with 48 nozzle garages
Nozzle types 10xx, 11xx, 12xx
Compressed air connection 0.45 MPa (4.5 bar)
Nozzle changer for the SIPLACE MultiStar
Dimensions (length x width x height) 314 mm x 94.5 mm x 72.25 mm
Number of magazines 4
A
Number of nozzle garages 48
Standard configuration 3 magazines with 36 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Nozzle types 20xx, 28xx
Compressed air connection 0.45 MPa (4.5 bar)
Nozzle changer for the SIPLACE TwinStar
Dimensions (length x width x height) 314 mm x 68 mm x 49 mm
Number of magazines max. 8 magazines for max. 16 nozzle garages
Number of nozzle garages may be freely configured
Standard configuration 3 magazines with two nozzle garages each
1 magazine with one nozzle garage
Nozzle types 4xx with adapter
5xx (standard)
9xx with adapter
Special nozzle, gripper