SOM-1619-001.pdf - 第3页

Contents Page 0301-002 3 Tg0590-PM-SO Contents Before Use ............................................................................................... 1 Contents .......................................................…

Before Use

We are grateful to you for purchasing these special specified

products.

Please keep in mind the following items before use.

1. Please read this instruction manual carefully for correct use of

these special specified products.

The following warning signs are classified into three catego-

ries according to the degree of danger.

Please fully understand the meaning of each sign for safety

precautions.

This indicates a potentially hazardous situation

which, if not avoided, may result in injury or physi-

cal damage.

CAUTION

DANGER

This indicates an imminently hazardous situation

which, if not avoided, will result in death or seri-

ous injury.

This indicates a potentially hazardous situation

which, if not avoided, could result in death or seri-

ous injury.

WARNING

This manual is made of recycled paper.

0304-001 1 Tg0590-PM-SO

SOM-1619-001

Before Use

INSTRUCTION MANUAL

Placement Position Teach

C-S210-05

TCM-X Series

SPECIAL SPECIFICATIONS

Contents

Page

0301-002 3 Tg0590-PM-SO

Contents

Before Use...............................................................................................1

Contents ...................................................................................................3

1. Scope ............................................................................................. 4

2. Data to be Taught........................................................................... 4

3. Notes on Teaching Operation ........................................................ 5

4. PCB Origin Offset Teach ................................................................ 6

4.1 "PCB Origin Offset Teach" Tab Sheet ...................................... 7

4.2 PCB Origin Offset Teach Operation Procedure........................ 10

5. Placement Position Teach.............................................................. 14

5.1 "Placement Position Teach" Tab Sheet .................................... 15

5.2 Placement Position Teach Operation Procedure ..................... 17

4 Tg0590-PM-SO0301-002

1. Scope

••

• PCB Origin Offset Teach

When the placement position in the pattern program deviates in

both X and Y directions, the deviation can be corrected by changing

the values in "PCB Origin Offset (X, Y)" of the operation data.

This function semi-automatically estimates the deviation by using

the P.E.C. recognition camera and shows the resultant values in

the "PCB Origin Offset (X, Y)" in order to correct any deviations in

X and Y directions.

••

• Placement Position Teach

The PCB pattern is displayed within the window size using the

P.E.C. recognition camera to check that each placement position

specified in the pattern program is correct.

If not correct, this function corrects the pattern program data by

using the manual alignment function (matching operation of compo-

nent outline display and PCB pattern using the pointing device).

2. Data to be Taught

The following are data items to be taught.

(1) PCB Origin Offset Teach

• PCB Origin Offset (X, Y)

This is on the operation data in the pattern program.

(2) Placement Position Teach

• PCB Placement Position P1 to Pn Step (X, Y) on Placement

Data (P).

• Pattern Origin O1 to On Coordinates (X, Y) on the Placement

Data (O).

1. Scope