4X4CEIM.pdf - 第15页
Page 13 SAFETY PRECAUTIONS Be sure to observe M27E DO NOT GIVE A SHOCK T O THE ELEC- TRICAL EQUIPMENTS. There is a risk of an electric shock, leak or malfunction of the machine. CAUTION M15E DO NOT PLACE ANY OBJECT AROUN…
Page 12
SAFETY PRECAUTIONS
Be sure to observe
WARNING
DO NOT DAMAGE POWER AND
OTHER CORDS OR PLUGS.
Damaged cord and plug may cause electric shock,
short circuit or fire.
Hold the plug when plugging in or unplugging.
Cord and plug repairs should be attempted only
by the person competent to do the electrical
work, or contact the manufacturer.
M85E
Never damage, remake, bring
close to heating appliances, bend
forcibly, twist, pull, put heavy
objects on, and bundle up.
PERIODICALLY REMOVE DUST
FROM POWER PLUG.
Dust on the plug may result in fire caused by
defective insulation because of moisture.
Pull out the power plug and wipe off dirt with dry
cloth.
If the machine is not going to be used for a long
period, turn off the breaker connected with the
machine.
M86E
FIRMLY INSERT THE
POWER AND OTHER
PLUGS.
Imperfect plugging in may
cause fire because of electric
shock and generated heat.
Do not use the damaged
plug or loose outlet.
M87E
USE THE SPECIAL-
IZED OUTLET AND
BREAKER EXCLU-
SIVELY.
If the breaker is shared be-
tween machines, it may cause
fire because of generated heat.
Check the dissipation power
in your Standard Specifica-
tion before consulting an
electrical contractor.
M89EB
M06E
GROUND THE MA-
CHINE PROPERLY.
There is a risk of an electric
shock or leak.
Consult a professional
electrical contractor.
M88EB
DO NOT INSERT OR
REMOVE POWER
AND OTHER PLUGS
BY WET HAND.
If plugged in or unplugged by
wet hand, it may result in
electric shock.
4X4C-E-IMA00-A03-00
Page 13
SAFETY PRECAUTIONS
Be sure to observe
M27E
DO NOT GIVE A
SHOCK TO THE ELEC-
TRICAL EQUIPMENTS.
There is a risk of an electric
shock, leak or malfunction of
the machine.
CAUTION
M15E
DO NOT PLACE ANY
OBJECT AROUND
EMERGENCY STOP
BUTTONS.
You will be unable to press a
button to stop the machine in
case of emergency.
DO NOT PLACE ANY
OBJECTS ON THE
COVER.
The cover may break due to the
weight of the objects and injure
you.
M16EB
M17EB
BE CAREFUL WITH
YOUR HANDS AND
FINGERS WHEN
CLOSING THE
COVER.
Your hands or fingers may be
caught in the cover and injured.
M24EB
TAKE AWAY TOOLS
FROM THE INSIDE
OF THE MACHINE.
The machine may malfunction
as a result of a tool left inside.
Before operating the ma-
chine, verify that no tools are
left inside.
M18E
DO NOT CLIMB OR
RIDE ON THE MA-
CHINE.
You may fall from or get caught
in the machine and get injured.
4X4C-E-IMA00-A03-00
M44E
WEAR A PROTECTIVE HAT AND
GOGGLES FOR MAINTENANCE
WORK.
Your head or eyes may be injured
while performing maintenance
work
M20EB
DO NOT BLOCK OFF THE
OUTLETOR INLET OF THE FAN.
The temperature inside of the machine will rise and
the machine may act abnormally.
And it may injure you.
Do not block off the outlet or inlet of the fan.
Periodically clean the filters of the outlet and
inlet.
Page 14
SAFETY PRECAUTIONS
Be sure to observe
CM301-DU (Danger Labels)
The following danger labels are pasted on this machine. Follow the instructions on each label. If a label has
come off, put a new one on a proper position. To order a label from the manufacturer, refer to PARTS LIST.
Label part No.
M32E
0 1 J Q B
feeder tables will have
serious injury.
The labels for safety pasted on the product
4X4C-E-IMA00-A03-00
The positions of danger labels on the front side
4X4C-AA00
The positions of danger labels on the rear side
4X4C-AB00
0 1 K 1 B
DANGER
DO NOT OPEN
THE COVER
WHEN
OPERATING
You will have serious
injury if you touch the
active part inside.
0 1 J X A
DANGER
DO NOT TOUCH
ACTIVE PART
WHEN
OPERATING
You will have serious
injury if you touch the
active part.
0 1 K 1 B
DANGER
DO NOT OPEN
THE COVER
WHEN
OPERATING
You will have serious
injury if you touch the
active part inside.
0 1 J X A
DANGER
DO NOT TOUCH
ACTIVE PART
WHEN
OPERATING
You will have serious
injury if you touch the
active part.