4X4CEIM.pdf - 第23页
4 Page 21 SERIAL PLA TE The serial plate attached to this machine indicates the model name and production number. DT40T -40U Actual numbers are shown on the plate instead of ∗. 4X4C-AB00 4M4C-AD00 DT40T -40U KXF-4Y4C 4X4…
Page 20
3 Precautions for Handling Disks
M37E
OBSERVE THE FOLLOWING ITEMS WHEN HANDLING FLOPPY DISKS.
Floppy disks and the data in them can be destroyed.
CAUTION
Eject button
Do not press this button
while the access indicator
lamp is lit.
Access indicator lamp
Do not eject the disk or turn off the power supply while the disk drive access indicator
lamp is lit.
Direct sunshine
Dust
Case
Disk
High or low temperature
Do not use the case that is not provided
for safekeeping and carrying.
A disk should not be stored or left in
areas exposed to the following
conditions:
Do not apply excessive force to the disk.Do not place heavy objects on the disk.
Automatic shutter
The automatic shutter should not be
opened. Do not touch the magnetic circu-
lar disk inside.
Refrain from smoking, drinking and
eating close to the disk.
Any loose labels should be re-
placed with new ones.
Do not place the disk in the
vicinity of a motor, CRT, or
anything that may generate a
magnetic field.
Do not attach a new label over an old one.Do not bring a magnet close to the
disk.
High humidity
HANDLING FLOPPY DISK
4X4C-E-IMA00-A03-01
4
Page 21
SERIAL PLATE
The serial plate attached to this machine indicates the model name and production number.
DT40T-40U
Actual numbers are shown on the plate instead of ∗.
4X4C-AB00
4M4C-AD00
DT40T-40U
KXF-4Y4C
4X4C-E-IMA00-A03-05
CM301-DU
Actual numbers are shown on the plate instead of ∗.
This is attached on the left end at the rear side of the machine.
This is attached on the left end at the rear side of the machine.
CM301-DU
KXF-4X4C
Page 22
= MEMO =
4X4C-E-IMA00-A03-01