00194477_Install_Win2003_manual.pdf - 第10页
Installation Manual for Windows 2003 Server (manual setup) Edition 04/2006 Fig. 2-5: Windows 2003 Server: Personalize Your Software → Please enter the Name and the Organizatio n . → Click the button Ne xt >. The dialo…
Installation Manual for Windows 2003 Server (manual setup) Edition 04/2006
→ If you wish to change the regional settings, please click the button Customize...
→ Make the changes.
→ Click the button Next>.
The following dialog appears:
9 / 34
Installation Manual for Windows 2003 Server (manual setup) Edition 04/2006
Fig. 2-5: Windows 2003 Server: Personalize Your Software
→ Please enter the Name and the Organization.
→ Click the button Next>.
The dialog "Your Product Key" appears.
Fig. 2-6: Windows 2003 Server: Product Key
→ Enter the software key.
→ Click the button Next>.
The following dialog for specifying the licensing mode and eventually the number of necessary client
acces licenses are necessary.
Warning:
If you do not allow enough Client Access Licenses (CAL) for your SIPLACE Pro
configuration you might have functional restrictions. If the server operates as
LineControlServer and you want to control more SIPLACE Machines than you specify
number of CALs, connections to machines can be refused.
Warning:
You can only switch once from Per Server mode to Per Seat mode, but not back. Siemens
L&A recommends not using this mode.
10 / 34
Installation Manual for Windows 2003 Server (manual setup) Edition 04/2006
Note:
You can extend the number of licenses later.
Fig. 2-7: Windows 2003 Server Licensing mode and number.
→ Leave the Licensing mode as “Per Server”
→ Enter the number of your purchased number of CALs
→ Click the button Next>.
The following dialog appears:
11 / 34