QP132三级参考手册.pdf.pdf - 第135页
Notes: Chapter 1 1 1 1.2 Training Evaluation Edition 1.0 11-8 QP-132 Level 3 T utorial
11.2 Training Evaluation
Circle the most appropriate answer from the list below.
(1) Before PAM, machine should be warmed up for:
a. more than 1 hour.
b. more than 3 hours.
c. more than 5 hours.
(2) Which is the correct order of performing PAM?
a. Nozzle A, B, C and D then E and F
b. Nozzle E and F then A, B, C and D
c. All the nozzles at the same time
(3) Center Offset is applied to:
a. nozzle holder center.
b. nozzle holder center and Camera center.
c. nozzle holder center and Program origin.
(4) Which nozzle is used for PAM?
a. 0.7 mm
b. 1.0 mm
c. 1.3 mm
Chapter 11 11.2 Training Evaluation
Edition 1.0 11-7 QP-132 Level 3 Tutorial
Notes:
Chapter 11 11.2 Training Evaluation
Edition 1.0 11-8 QP-132 Level 3 Tutorial
QP-132 Level 3 Tutorial Manual
Preliminary May 31, 2000
Edition 1.0 July 31, 2000
Edition 1.1 September 30, 2000
FUJI Machine Manufacturing Co., Ltd.
SMT Equipment
19 Chausuyama, Yamamachi, Chiryu,
Aichi Prefecture, 472-8686 Japan
Copyright 2000 by Fuji Machine Manufacturing Co., Ltd.
Printed in Japan
The FUJI Internet
Fuji Internet aims at providing information to our customers in
the most efficient manner. This site makes a range of services
available, from manual updates and FAQs, to online technical
reports. Fuji hopes that this site will be used as a source of
information in addition to the services provided by your agent.
Fuji’s website is located at http://www.fuji.co.jp/
Fuji Internet membership is required to access the Technical
Information section of the site, contact your agent for details.
Any comments or opinions regarding this manual can be sent to
intnetqst@fuji.co.jp