QP132三级参考手册.pdf.pdf - 第25页
(Continued from the previous page.) 2 9 5 8 1 11 10 1 1 1 1 1 1 4 1 1 1 5 2 1 To avoid damage, do not open the drawer during operation. CAUTION CAUTION BE SURE TO WEAR THE WRIST STRAP BEFORE WORKING IN THE CONTROL BOX. 1…
6. Safety Labels
To warn the operator of hazards, safety labels are attached to the machine at the
positions indicated in the figure below.
Familiarize yourself with each label and its message before operating the machine.
QP1MO001
R
E
S
E
T
R
E
S
E
3
4
1
2
5
7
Never insert your hand
inside an operating machine.
Moving parts may cause injury.
DANGER
CAUTION
Make sure that nozzles are up position when PFU is installed
or removed in order to avoid damages to nozzles.
Verifier que les buses sont en position haute lors de I'insertion
ou du retrait d'un PFU pour eviter d'endomagger les buses.
3
7
1
1
1
1
5
2
1
7
7
7
1
4
6
6
Never load 2 pallets
simultaneously.
DANGER
Safety Guidelines
Edition 1.0 12 QP-132 Level 3 Tutorial
(Continued from the previous page.)
2
9
5
8
1
11
10
1
1
1
1
1
1
4
1
1
1
5
2
1
To avoid damage,
do not open the drawer
during operation.
CAUTION
CAUTION
BE SURE TO WEAR THE WRIST STRAP
BEFORE WORKING IN THE CONTROL BOX.
1. TAKE OUT THE WRIST STRAP FROM THE
CONTROL BOX.
2. PUT ON THE WRIST STRAP. 3. START WORK IN THE CONTROL BOX.
<CAUTION>
It is NOT possible to use the main or rear
control panels while the inching box is in use.
(With the exception of the ON, OFF, CYCLE STOP
and EMERGENCY STOP buttons.)
<CAUTION>
AN EXPLOSION MAY OCCUR IF THE BATTERY IS NOT REPLACED
PROPERLY. USE THE BATTERY TYPE SPECIFIED BY FUJI (OR
EQUIVALENT BATTERY TYPE). USED BATTERIES MUST BE
DISCARDED FOLLOWING THE MANUFACTURER'S INSTRUCTIONS.
10
11
9
8
QP1MO002
Safety Guidelines
Edition 1.0 13 QP-132 Level 3 Tutorial
7. Before Operation
Prior to operating the machine, make sure that no one is inside the machine or inside the
safety fence, or that anyone other than yourself is touching the machine.
8. Do not Leave Tools in or on the Machine
Following maintenance on a machine, make sure that no tools have been left in or on the
machine. Tools that get caught in the machine's moving parts may cause severe damage
to the machine.
Safety Guidelines
Edition 1.0 14 QP-132 Level 3 Tutorial