QP132三级参考手册.pdf.pdf - 第26页
7. Before Operation Prior to operating the machine, make sure that no one is inside the machine or inside the safety fence, or that anyone other than yourself is touching the machine. 8. Do not Leave T ools in or on the …
(Continued from the previous page.)
2
9
5
8
1
11
10
1
1
1
1
1
1
4
1
1
1
5
2
1
To avoid damage,
do not open the drawer
during operation.
CAUTION
CAUTION
BE SURE TO WEAR THE WRIST STRAP
BEFORE WORKING IN THE CONTROL BOX.
1. TAKE OUT THE WRIST STRAP FROM THE
CONTROL BOX.
2. PUT ON THE WRIST STRAP. 3. START WORK IN THE CONTROL BOX.
<CAUTION>
It is NOT possible to use the main or rear
control panels while the inching box is in use.
(With the exception of the ON, OFF, CYCLE STOP
and EMERGENCY STOP buttons.)
<CAUTION>
AN EXPLOSION MAY OCCUR IF THE BATTERY IS NOT REPLACED
PROPERLY. USE THE BATTERY TYPE SPECIFIED BY FUJI (OR
EQUIVALENT BATTERY TYPE). USED BATTERIES MUST BE
DISCARDED FOLLOWING THE MANUFACTURER'S INSTRUCTIONS.
10
11
9
8
QP1MO002
Safety Guidelines
Edition 1.0 13 QP-132 Level 3 Tutorial
7. Before Operation
Prior to operating the machine, make sure that no one is inside the machine or inside the
safety fence, or that anyone other than yourself is touching the machine.
8. Do not Leave Tools in or on the Machine
Following maintenance on a machine, make sure that no tools have been left in or on the
machine. Tools that get caught in the machine's moving parts may cause severe damage
to the machine.
Safety Guidelines
Edition 1.0 14 QP-132 Level 3 Tutorial
Chapter 1
In Manipulator