i3070series6_Site_Preparation+11-12.3.pdf.pdf - 第11页

Site Preparation Process 1 Site Preparation 1-7 Power Requir ements System Powe r What power option is your system? Opt. _______________ [ ] AC mains power verified? [ ] Mains disconnect installed? [ ] Do you need t o in…

1-6 Site Preparation

1 Site Preparation Process

Site Prep Checklist

Use this checklist to check off each task as you complete it.

Table 1-1 Site preparation checklist

Task Checklist

Planning [ ] Location chosen?

Specialists assigned?

Site Coordinator:

__________________________________________________________

System Administrator:

__________________________________________________________

Structural Specialist:

__________________________________________________________

EMC Specialist:

__________________________________________________________

Environmental Specialist:

__________________________________________________________

Electrical Specialist:

__________________________________________________________

Vacuum Specialist:

__________________________________________________________

Compressed Air Specialist:

__________________________________________________________

Communications Specialist:

__________________________________________________________

[ ] Schedule Created:

Structural Requirements [ ] Floor suitable?

[ ] Room to move the big box? If not, do you have a place to unpack it?

[ ] Storage sufficient?

RF Attenuation Requirements [ ] Required to meet EMC directives?

[ ] Additional attenuation sufficient?

Environmental Requirements [ ] Air quality suitable?

[ ] Ambient temperature suitable?

[ ] Cooling sufficient?

[ ] Humidity suitable?

[ ] Electromagnetic environment suitable?

Site Preparation Process 1

Site Preparation 1-7

Power Requirements System Power

What power option is your system? Opt. _______________

[ ] AC mains power verified?

[ ] Mains disconnect installed?

[ ] Do you need to install power conditioning equipment?

[ ] Do you need to install a new transformer?

[ ] What system drop wire size is required? Wire Size ____________

[ ] What system drop breaker size is required? Breaker Size ____________

[ ] Power cable installed for mains?

Connect Mains Power

[ ] Power installed to system?

Convenience Outlet Power

[ ] Testhead strip printer?

[ ] Testhead server?

Compressed Air and Vacuum

Requirements

[ ] Compressed air line installed?

[ ] Vacuum plan done?

[ ] How many solenoids needed? _____________

[ ] Vacuum equipment installed?

Networking [ ] LAN cabling installed?

The i3070 communicates with other systems via IEEE 802.3 Local Area Networking. All

the necessary software and licensing comes with the system, but the customer is

responsible for installing the external LAN cabling to the i3070.

The internal testhead LAN within each i3070 system — which includes the System Card

and Module Control Card in each module — is identical between systems. However, the

hardware address for each System Card and Module Control Card is unique. The

hardware address is assigned at the factory and is marked on each card.

The remaining items go beyond site preparation, but must be completed before installation

Receiving and Moving

Instructions

[ ] Insurance coverage arranged for arrival?

[ ] System inspected for physical damage?

[ ] Shipment inventoried?

[ ] Equipment moved to installation site?

[ ] Testhead unpacked (crate removed, but not removed from the pallet). The Keysight

representative will unpack the smaller boxes and move the system as part of installation.

Table 1-1 Site preparation checklist (continued)

Task Checklist

1-8 Site Preparation

1 Site Preparation Process