i3070series6_Site_Preparation+11-12.3.pdf.pdf - 第43页

Power Requirements 6 Site Preparation 6-11 Wiring Diagrams Note that the PDU phase configuration is determined by the location of the jump er, as shown by the orange/gr een lines in th e wi ring diagrams (t he colors do …

100%1 / 56
6-10 Site Preparation
6 Power Requirements
E9905G Test System
Figure 6-4 shows the locations of the AC outlets in an E9905G test system with side
pod.
Figure 6-4 Location of AC outlets in E9905G (rotated, rear view)
Outlet 4
PDU
Outlet 3
Outlet 1
Outlet 2
Outlet 0
Power Requirements 6
Site Preparation 6-11
Wiring Diagrams
Note that the PDU phase configuration is determined by the location of the jumper,
as shown by the orange/green lines in the wiring diagrams (the colors do not
indicate the actual colors of the jumper wire).
Figure 6-5 Wiring diagram for 380–415 V input; 3-phase wye with neutral; 220-240 V output
voltage
Figure 6-6 Wiring diagram for 200–240 V; 3-phase wye or 3-phase delta
380-415 V output voltage is not supported.
6-12 Site Preparation
6 Power Requirements