5M-1751-004w_G5S.pdf - 第19页

Safety Precautions Safe-10 1OM-1751 Alert Indications described as " CAUTION " Alert Description Related Items Avoid hand and nger injuries. • Be careful to avoid hand and nger injuries when closing the cover…

100%1 / 190
Safety Precautions
Safe-9
1OM-1751
1305-002
4. Alert Indications in Instruction Manual
Alert Indications described as "
WARNING
"
Alert Description Related Items
Be sure to keep the all covers (door type) closed to avoid any
danger when the automatic operation is started or during the
automatic operation.
"2.2.3" in
"Chapter 1 (Vol. 1)"
Before performing maintenance work, shut o the power breaker
and lock the power breaker with the padlock.
"2.3.1" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to work
inside the machine.
This machine uses strong permanent magnets in the moving
areas of the X/Y beams.
The pacemaker may be aected by the magnetism and a serious
accident will result.
"3.4" in
"Chapter 1 (Vol. 1)"
If the bank feeder change cart is not set, a clearance will be left
at the feeder setting area and the operator will be exposed to
danger.
Be sure to use the machine with the bank feeder change cart
being attached.
"3.8.1" in
"Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to
handle the tape feeders.
The pacemaker may be aected by the magnetism and a serious
accident will result.
"1.2.2" in
"Chapter 3 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"
Only a well-trained service person should perform maintenance
tasks carefully through the specied procedures.
"1.1" in
"Chapter 1 (Vol. 4)"
Before maintenance work, shut o the power breaker and lock
the power breaker with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 1 (Vol. 4)"
Safety Precautions
Safe-10
1OM-1751
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoid hand and nger injuries.
•
Be careful to avoid hand and nger injuries when closing the covers
(door type).
•
Hold the handgrip rmly and open or close the cover (door type)
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
When the green lamp of the light tower is ON or ickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
Before operating the machine, conrm that there are no people around
the machine (especially, the other side of the machine operation) and no
objects such as tools and parts are left around the machine.
"3.2" in
"Chapter 1 (Vol. 1)"
"1.1.4" and
"4.1" in
"Chapter 3 (Vol. 1)"
Depending on the setting for the PCB discharge from the input machine
to this machine or from this machine to the output machine, the
conveyor may move at the moment when the PCB has been removed.
In such cases, your nger might be caught.
"3.2" in
"Chapter 1 (Vol. 1)"
Strong Magnetism
•
Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card and a watch
close to the machine. Such an object can easily be aected by
the magnetism.
The data of the magnetic card might be cleared or a watch, etc., may
be damaged due to the strong magnetism.
"3.4" in
"Chapter 1 (Vol. 1)"
1305-002
4. Alert Indications in Instruction Manual
Safety Precautions
Safe-11
1OM-1751
1305-002
4. Alert Indications in Instruction Manual
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
When a tape feeder is attached or detached, be sure not to drop
it.
Otherwise, a foot injury will result or the feeder itself may be damaged.
Carefully handle each feeder one by one and do not drop any.
"3.8" in
"Chapter 1 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"
"3.1" in
"Chapter 3 (Vol. 1)"
"3.4.2" in
"Chapter 3 (Vol. 1)"
Hazardous to your hands and ngers!
·
Be sure to hold the handle to move the bank feeder change cart.
·
Be careful not to hit your hand against the cover while installing the
bank feeder change cart onto the main machine.
"3.8.1" in
"Chapter 1 (Vol. 1)"
Hazardous to your hands and ngers!
·
Be sure to hold the handle to move the bank feeder change cart.
"2.2.4" in
"Chapter 3 (Vol. 1)"
Watch your step!
·
Be careful not to hit your foot against the cart while moving the bank
feeder change cart.
Especially, the resistance against cart movement may change rapidly
when the oor is ragged and the cart gets caught on the oor or
a sheet is used and the cart gets caught at the edge or a slackened
portion of the sheet.
·
Make sure to insert the feeder into the deep end.
When the tape feeder is mounted onto the feeder carriage, make sure
that it has been inserted into the deep end and xed securely.
In the case that it has not been xed securely, the tape feeder might
fall, which might cause a lower leg injury or damage to the feeder.
"3.8.1" in
"Chapter 1 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"