5M-1751-004w_G5S.pdf - 第34页
Safety Precautions Safe-25 1OM-1751 1303-001 5. Alert Labels No. Alert Labels and Description (4) Description Only well-trained service personnel shall replace the cutter blades. Otherwise, a hand injury , etc., will r…
Safety Precautions
Safe-24
1OM-1751
1305-002
5. Alert Labels
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
Strong permanent magnets are used in the moving mechanisms of the X/Y beam.
Those who wear implanted pacemakers should not work inside the machine.
The pacemaker may be aected by magnetism, causing a serious accident.
(2)
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be a ffected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
10-0338-
Description
Permanent magnets are used in the tape feeding and cover tape take-up sections of
the tape feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape
feeders. Otherwise, the pacemaker may be aected by magnetism, causing a serious
accident.
(3)
Description
When maintenance or checks are performed, make sure to turn o the power to the
machine or air source. When maintenance or checks are performed with the power
or air turned ON, an electric shock or injury might be caused.
Safety Precautions
Safe-25
1OM-1751
1303-001
5. Alert Labels
No. Alert Labels and Description
(4)
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servo amplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
(6)
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.
Safety Precautions
Safe-26
1OM-1751
1305-002
5. Alert Labels
No. Alert Labels and Description
(7)
CAUTION
10-0146-
Do not let your finger
get caught in this.
An injury will result.
Description
When a covers (door type) is opened or closed, be sure to hold the grip rmly and
slowly move the cover up or down. Otherwise, your hand and ngers might get
caught in the door and get injured.
(8)
Description
Before maintenance work, shut o the power breaker and lock it with the padlock.
Even when the power breaker is set to "OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance
work.
(9)
Do not put any object
on this section.
This might damage the machine.
10-0326A
Description
Do not put any object on the machine. Doing so might damage the machine.
This might damage the machine.