TM1611_Stick Parts Support of Setup Verification.pdf - 第11页

 SMT Software Engineering Group IM Operations Y AMAHA MOTOR CO., L TD.  MD OC-SOFT50044  11/23   2.4. Replacing/Ref i lling Part s on the Machine （ （ （ （ VGOS V3.x ） ） ） ） 2.4.1. Refilling Stick Part s S tep1. A wa…

100%1 / 23
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
10/23
2. The Plan Navigator shows the position in which the feeder is to be set.
So, set the feeder into the specified position on the machine.
If the feeder, cart and machine are CLi compatible or if they are SS compatible, the feeder
set position will be recognized automatically.
If they are not CLi/SS compatible, read the barcode of the position where the new feeder
is set from the feeder set position barcode label provided on the machine.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
11/23
2.4. Replacing/Refilling Parts on the Machine（
（（
（VGOS V3.x）
））
）
2.4.1. Refilling Stick Parts
Step1. A warning appears when the number of remaining parts drops below the preset
number.
1. The following [Parts remain warning] dialog box appears and the yellow warning lamp
flashes.
Click the [ERROR CLEAR] button to close the dialog box.
2. The information shown in the [Production] tab page (Monitor window) appears.
In the [Detail] field, the part that caused the warning is displayed in yellow and the part
that has run out is displayed in red.
Prepare the parts to be added.
Step2. Register parts information.
1. Use a barcode reader to read the "SPLICING" barcode given on the "PROCESS
BARCODE" label affixed to the machine.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
12/23
2. The contents of the Plan Navigator will change as shown below.
Use a barcode reader to read the feeder ID shown on the new feeder.
3. The contents of the Plan Navigator will change as shown below.
Use a barcode reader to read the parts barcode on the parts to be refilled.
【Note】The parts ID, lot ID and reel ID can be read in any order.
Step3. Replenish parts.
1. Production will resume.