TM1611_Stick Parts Support of Setup Verification.pdf - 第18页

 SMT Software Engineering Group IM Operations Y AMAHA MOTOR CO., L TD.  MD OC-SOFT50044  18/23   3.3.2. Setting Other Mu lti Stick Part s S tep1.Set t he parts in a feeder . 1. Click [Support] – [ Parts Setup], che…



SMT Software Engineering Group

IM Operations YAMAHA MOTOR CO., LTD.



MDOC-SOFT50044 

17/23

2. The Plan Navigator shows the position in which the feeder is to be set.

So, set the feeder into the specified position on the machine.



If the feeder, cart and machine are CLi compatible, the feeder set position will be

recognized automatically.

If they are not CLi compatible, read the barcode of the position where the new feeder is

set from the feeder set position barcode label provided on the machine.



SMT Software Engineering Group

IM Operations YAMAHA MOTOR CO., LTD.



MDOC-SOFT50044 

18/23



3.3.2. Setting Other Multi Stick Parts

Step1.Set the parts in a feeder.

1. Click [Support] – [Parts Setup], check the contents displayed in the Operation Navigate,

and prepare the required parts.

2. Set the parts in a feeder.



Step2. Set the first parts in place.

1 Use a barcode reader to read the barcode on the stick set in the feeder.

When the first barcode is read, the [Plan Navigator] dialog box will appear. So, read the

parts ID, lot ID and reel ID barcodes.



【Note】The parts ID, lot ID and reel ID can be read in any order.



Step3. Set the feeder in place.

1. The contents of the Plan Navigator will change as shown below.

Use a barcode reader to read the feeder ID shown on the new feeder.





SMT Software Engineering Group

IM Operations YAMAHA MOTOR CO., LTD.



MDOC-SOFT50044 

19/23



2. The Plan Navigator shows the position in which the feeder is to be set.

So, set the feeder into the specified position on the machine.



If the feeder, cart and machine are CLi compatible, the feeder set position will be

recognized automatically.

If they are not CLi compatible, read the barcode of the position where the new feeder is

set from the feeder set position barcode label provided on the machine.

