TM1611_Stick Parts Support of Setup Verification.pdf - 第5页

 SMT Software Engineering Group IM Operations Y AMAHA MOTOR CO., L TD.  MD OC-SOFT50044  5/23   2.3. Setup W ork on M ach i ne （ （ （ （ VGOS V3.x ） ） ） ） 2.3.1. Setting Multi Stick Parts S tep1.Set t he parts in a f…

100%1 / 23
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
4/23
5. Select [Check required] on [Stick Parts]-[Setting Value] combo box.
6. Click [Save] button and finish.
６
６６
６
５
５５
５
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
5/23
2.3. Setup Work on Machine（
（（
（VGOS V3.x）
））
）
2.3.1. Setting Multi Stick Parts
Step1.Set the parts in a feeder.
1. Click [Monitor] – [Production], check the contents displayed in the Operating Navigation,
and prepare the required parts.
2. Set the parts in a feeder.
Step2. Set the first parts in place.
1 Use a barcode reader to read the barcode on the first stick set in the feeder.
When the first barcode is read, the [Plan Navigator] dialog box will appear. So, read the
parts ID, lot ID and reel ID barcodes.
【Note】The parts ID, lot ID and reel ID can be read in any order.
Read the first stick parts
Image that saw Multi Stick Feeder on
PARTS001
PARTS003
PARTS002
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
6/23
Step3. Set the next parts in place.
1. The contents of the Plan Navigator will change as shown below.
When the plural parts is set in one feeder, continue to read the other parts barcode (Parts
ID, Lot ID, Stick ID) by the barcode reader.
Repeat reading the stick parts barcode until the barcode of all stick parts are read.
Image that saw Multi Stick Feeder on
PARTS001
PARTS003
PARTS002
Read the next stick parts