TM1611_Stick Parts Support of Setup Verification.pdf - 第15页

 SMT Software Engineering Group IM Operations Y AMAHA MOTOR CO., L TD.  MD OC-SOFT50044  15/23  S tep3. Set the next parts in place. 1. T he contents of the Plan Naviga tor will chan ge as shown belo w.   W hen th…

100%1 / 23
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
14/23
3.3. Setup Work on Machine（
（（
（VGOS V1.x/V2.x）
））
）
3.3.1. Setting Multi Stick Parts
Step1.Set the parts in a feeder.
1. Click [Support] – [Parts Setup], check the contents displayed in the Operation Navigate,
and prepare the required parts.
2. Set the parts in a feeder.
Step2. Set the first parts in place.
1 Use a barcode reader to read the barcode on the first stick set in the feeder.
When the first barcode is read, the [Plan Navigator] dialog box will appear. So, read the
parts ID, lot ID and reel ID barcodes.
【Note】The parts ID, lot ID and reel ID can be read in any order.
Image that saw Multi Stick Feeder on
PARTS001
PARTS003
PARTS002
Read the first stick parts
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
15/23
Step3. Set the next parts in place.
1. The contents of the Plan Navigator will change as shown below.
When the plural parts is set in one feeder, continue to read the other parts barcode (Parts
ID, Lot ID, Stick ID) by the barcode reader.
Repeat reading the stick parts barcode until the barcode of all stick parts are read.
Image that saw Multi Stick Feeder on
PARTS001
PARTS003
PARTS002
Read the next stick parts
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50044
16/23
Step4. Set the feeder in place.
1. The contents of the Plan Navigator will change as shown below.
If all the stick parts are read, Use a barcode reader to read the Feeder ID of feeder that
sets stick parts.