AX501最新3.6x版英文操作手册.pdf.pdf - 第29页

4022 593 51894 Operatin g Man ual 09.01 AX-301/501, AX-3/5 29 6 CHAPTER 6 Run curr ent pr ogr am Figure 33 Run placement program • Select ’Pr ogram s’ (1). • Sel ect desir ed placemen t program (2). • Sel ect ’Run’ (3). …

100%1 / 47
4022 593 51894 Operating Manual
09.01 AX-301/501, AX-3/5 28
5
2 Clean with a vacuum cleaner:
- wasted components in transport area.
- wasted components on feeder positions or feeder trolley.
3 Remove the components from under the ’fingers’ of the front board
clamp.
Figure 31 Machine cleaning
A-Series feeder trolley only:
Figure 32 A-series trolley cleaning
4 Remove the A-Series feeder trolley from the machine, see 2.5.1.
Open the lid and remove components from the feeder trolley.
3
2
2
2
2
4
4022 593 51894 Operating Manual
09.01 AX-301/501, AX-3/5 29
6
CHAPTER 6 Run current program
Figure 33 Run placement program
•
Select ’Programs’ (1).
• Select desired placement program (2).
• Select ’Run’ (3).
• Confirm selection (4).
Figure 34 Placement program activated
1
2
3
4
4022 593 51894 Operating Manual
09.01 AX-301/501, AX-3/5 30
7
CHAPTER 7 Feeders and preparations
NOTE: In case of an error call for assistance.
To maximize production time it is important to prepare for a change over
in advance.
Items to be checked or prepared:
1 Toolbits, availability
2 Placement program, availability
3 Prepared board support plates, availability,
see User Reference Manual, to prepare them.
4 Prepared feeders, availability
see feeder operating manual, to prepare them.
5 Trolleys with the feeders at the correct places.