YS24X_Mainte_E.pdf - 第23页

xx Safety instructions Potential hazard Electrical shock T o avoid hazard Keep the ionizer away from eyes. Do not disassemble or touch the discharge needles. Applicable machines Machines equipped with ionizer (option) Ca…

100%1 / 162
xix
Safety instructions
Potential
hazard
Burn hazard
To avoid
hazard
Heater becomes very hot during and shortly after operation, so do not touch it.
Applicable
machines
YSD,YSH20 machines equipped with heater (option)
Case
• Setup
•
Maintenance
Potential
hazard
Electrical shock hazard
To avoid
hazard
Do not touch while power is supplied.
Applicable
machines
Z:LEX(YSM20/YSM20W), YSM40/YSM40R, All YS series machines
(controller unit) except for inspection equipment
Case
Maintenance
Potential
hazard
Loss of eyesight
To avoid
hazard
Do not directly look into laser beam.
Applicable
machines
IT options such as barcode readers (Class 2 laser)
YS series machines (Class 1 laser)
Case
All case
xx
Safety instructions
Potential
hazard
Electrical shock
To avoid
hazard
Keep the ionizer away from eyes. Do not disassemble or touch the discharge needles.
Applicable
machines
Machines equipped with ionizer (option)
Case
All case
Potential
hazard
Electrical shock
To avoid
hazard
Always turn off UPS switch when performing maintenance work.
Applicable
machines
Machines equipped with UPS (option)
Case
Maintenance
Potential
hazard
Electrical shock
To avoid
hazard
Always turn off UPS switch when performing maintenance work.
Applicable
machines
Machines equipped with UPS (option)
Case
Maintenance
xxi
Safety instructions
3.2.4 Handling each section
Potential
hazard
Solvent may catch fire.
To avoid
hazard
Keep solvents such as alcohol away from fire or flame.
Applicable
machines
All solder paste printers
Case
• Setup
•
Maintenance
Potential
hazard
Electrical shock hazard
To avoid
hazard
Before opening covers wait at least 100 seconds after turning power off.
Applicable
machines
All machines
Case
Maintenance
Potential
hazard
Possible skidding or slipping causing injury
To avoid
hazard
Do not step on base section.
Applicable
machines
YS24X (machines equipped with sATS II)
Case
All case