DECAN_S2_Operation(ENG_Ver4.1).pdf - 第61页

Advanced Chip Shooter MEMO Items t o be inspect ed du ring p roduction DE CAN S2 O pe rat ion H an db ook 4-1 8

100%1 / 92
Items to be inspected during production
Chapter 4
Advanced Chip Shooter
DECAN S2 Operation Handbook
4-17
This chapter describes the methods for temporary stop of the
machine(Continue / Start mode), emergency stop (by manual/ by
system) and the restarting the production after emergency stop when
checking errors or other items and taking measures during production.
Emergency Stop > System emergency stop: How to take measures against the emergency stop due to the judgment of the system itself
Emergency Stop
Step 5.
Press the 'READY' button to supply power to the motor of the
machine.
Step 6.
Return the machine to the origin, if necessary.
In the case of an error against which the user can not take measures,
inform the manager of it and contact our C/S or the loacl agent.
If the work is stopped due to emergency stop, take measures against
the error and start the work again from the beginning.
Advanced Chip Shooter
MEMO
Items to be inspected during production
DECAN S2 Operation Handbook
4-18
Finish production and change work
Chapter 5
Advanced Chip Shooter
DECAN S2 Operation Handbook
5-1
This chapter describes the method to finish production and change the
work to new work as well as the method to turn off the power supply
to the machine after finishing production and keeping the area around
the machine clean and tidy.
Finishing Production > Finishing the Production and shutting down the machine
Finishing Production
Chapter 5
Finish production and change work
This chapter describes the method to finish production and change the work to new work as well as the method to turn off the power supply to the
machine after finishing production and keeping the area around the machine clean and tidy.
1. Finishing the Production and shutting down the
machine
Step 1.
Select the <PCB Stop> check box
ㆍ Clicking <PCB Stop> button during production will stop the production after finishing
the Production of the PCB on work.
When production is started after setting the PCB production quantity,
the machine stops automatically after PCBs as many as set are
produced even though the 'PCB Stop' button is not pressed.
Step 2.
Press the 'STOP', 'RESET' button
ㆍ Changes the machine status into the 'IDLE' mode
Finishing Production