DECAN_S2_Operation(ENG_Ver4.1).pdf - 第71页
Advanced Chip Shooter MEMO Finish p r oduction and chang e wo rk DE CAN S2 O pe rat ion H an db ook 5-1 0
Finish production and change work
Chapter 5
Advanced Chip Shooter
DECAN S2 Operation Handbook
5-9
This chapter describes the method to finish production and change the
work to new work as well as the method to turn off the power supply
to the machine after finishing production and keeping the area around
the machine clean and tidy.
Changing Jobs > Check and teach positions
Changing Jobs
9. Check and teach positions
For further details, refer to "4. Check and teach positions" (page
3-18)
10. Placement
Download the PCB and execute the new job.
Advanced Chip Shooter
MEMO
Finish production and change work
DECAN S2 Operation Handbook
5-10
Check others and replace exhausted parts
Chapter 6
Advanced Chip Shooter
DECAN S2 Operation Handbook
6-1
This Chapter describes the items for which care must be exercised while
using thetape feeder as well as the method to take measures when
parts are exhausted.
Checking Feeder > Checking Reel hanger (Pneumatically Driven)
Checking Feeder
Chapter 6
Check others and replace exhausted parts
This Chapter describes the items for which care must be exercised while using thetape feeder as well as the method to take measures when parts
are exhausted.
1. Checking Reel hanger (Pneumatically Driven)
Check Points
ㆍ After mounting the feeder, make sure the reel hanger is in contact
with the inside of the feeder.
ㆍ Make sure the reel hanger rib sits on the reel properly.
Caution
When the reel setting is defective, the pickup position may be
offset due to increased load. Reel hanger rib guides the reel to feed
properly. If the rib is out of the reel, feeding error may occur.
Checking Feeder