00198536-02_AI_Mixed-Mode_TX2iV1_TX2V2_de_en.pdf - 第85页
2 Brief description 2.2 Scope of delivery Assembly Instructions / Montageanleitung SIPLACE TX2i V1 SIPLACE TX2 V2 Option Mixed-Mode 01/2019 85 Ordering the vacuum control valve: Fig .1 0: Vac uum co ntr ol val ve ass em…
2 Brief description
2.2 Scope of delivery
84 Assembly Instructions / Montageanleitung SIPLACE TX2i V1 SIPLACE TX2 V2 Option Mixed-Mode 01/2019
Fig.7: Gantry without vacuum hoses (using a
SIPLACETX2iV1 as example)
Gantry without vacuum hoses for SIPLACE
CPP head (1).
2.2 Scope of delivery
SIPLACE TX Mixed Heads Retrofit Kit [03157293-xx]
Quantity Designation Item no.
1 Mixed Heads Retrofit Kit COTi TX
Consists of:
03157106-xx
1 Mixed heads conversion kit, holder for reject bin 03157117-xx
1 Mixed heads conversion kit, NC holder left 03157113-xx
1 Mixed heads conversion kit, NC holder right 03157116-xx
2 DIN EN ISO 8734 Master part 03015769-xx
1 Mixed Heads Retrofit Kit Pneumatics
Consists of:
03157292-xx
6 Blanking plug QSC-6H 00337891-xx
2 Y connector QSY-10-6 03068046-xx
0.52 m Plastic hose PUN-10x1.5 BL 00324466-xx
0.52 m Plastic hose PUN-10x1.5 BL 00324466-xx
1 Push-in connector QS-6 03049770-xx
1 Cable ties B = 3.6mm L = 140mm TY 24M 00805141-xx
1 Grip cap GPN 210 ZL 19 × 20 03210738-xx
Fig.8: Mixed heads conversion kit COT-i TX
[03157106‑xx]
Fig.9: Mixed Heads Conversion Kit Pneumatics (incl.
grip cap) [03157292 xx] (without cable ties)
2 Brief description
2.2 Scope of delivery
Assembly Instructions / Montageanleitung SIPLACE TX2i V1 SIPLACE TX2 V2 Option Mixed-Mode 01/2019 85
Ordering the vacuum control valve:
Fig.10: Vacuum control valve assembly TX
[03162136‑xx]
The installation of the vacuum control valve is re-
quired, if only one SIPLACE C&P20x head is op-
erated with a vacuum pump. If the machine was
previously operated with a vacuum pump and two
SIPLACE C&P20x heads , this vacuum control
valve was not fitted and must be installed for the
mixed mode function.
Quant-
ity
Designation Item no.
1 Vacuum control valve assembly TX
Consists of:
03162136-xx
1 Vacuum control valve Becker ST 613-0-2 03109300-xx
1 T-piece 3/4" – 1” 03162231-xx
1 Double nipple 3/4" 03038435-xx
1 Thread sealant Loctite 55 03092492-xx
Additionally required parts:
●
Upgrade kit 2 pneumatics [03162637‑xx]
Fig.11: Upgrade kit 2 pneumatics [03162637‑xx]
If the mixed heads option is installed and a
vacuum pump is present, the following upgrade
kit is needed in addition:
If the mixed heads option is installed and no
vacuum pump is present, this upgrade kit is
already installed in the machine.
●
Upgrade kit vacuum pump TX V2 [03162656Sxx]
Fig.12: Upgrade kit vacuum pump TX V2 [03162656Sxx]
This upgrade kit is required if a vacuum pump is
not available yet but will be installed later on.
2 Brief description
2.3 Tools and equipment required
86 Assembly Instructions / Montageanleitung SIPLACE TX2i V1 SIPLACE TX2 V2 Option Mixed-Mode 01/2019
2.3 Tools and equipment required
The following tools and equipment are required for the work described in this manual:
T Standard tooling
T31 00376492-xx Hexagon L-wrench set 1,5-10
T 03079617-xx Depth measuring gauge 300mm
T 00381443‑xx Pipe/hose cutters Festo ZRS 7658
C 03092492-xx Loctite 55
Service manual for your machine
00198147-xx Assembly instructions Vacuum Pump SIPLACE TX V1/V2-Series
2.4 Required Working Time
The complete installation will take approx. 5 hours.
2.5 Prerequisites and restrictions
The mixed mode option can be installed in the following machines:
●
SIPLACE TX2i V1
●
SIPLACE TX2 V2
Assembly on other machines of the TX series is not possible.